I recall the QSee uses port 85 by default, instead of 80, in case you haven't tried that. That's one of the differences between QSee and Dahua versions of the same cam.
I also remember a post where someone tested flashing QSee firmware onto their Dahua and it worked, but when they tried to go back to the Dahua firmware, it wouldn't let them do it. I may be mis-remembering this, though.
Hi hi guys
On 7/24/2013 at 8:35 PM, MaxIcon said:
I recall the QSee uses port 85 by default, instead of 80, in case you haven't tried that. That's one of the differences between QSee and Dahua versions of the same cam.
I also remember a post where someone tested flashing QSee firmware onto their Dahua and it worked, but when they tried to go back to the Dahua firmware, it wouldn't let them do it. I may be mis-remembering this, though.
Hi guy I’m currently working on a swann 16channel nvr with 8 ip Swann cameras but I try adding a Dahua ip camera and it’s not working ,I did all the all possible setting and change from swann to ONVIF changed IP address ,port number & password but it didn’t work . Any help plss
Connect Q-See HD camera to Swann HD NVR
in IP/Megapixel Cameras and Software Solutions
Posted
Hi hi guys
Hi guy I’m currently working on a swann 16channel nvr with 8 ip Swann cameras but I try adding a Dahua ip camera and it’s not working ,I did all the all possible setting and change from swann to ONVIF changed IP address ,port number & password but it didn’t work . Any help plss