Jump to content

lucasmadrid

Members
 View Profile  See their activity

  • Content Count

    2

  • Joined

  • Last visited

Posts posted by lucasmadrid

  1. Posted

    On 5/17/2011 at 1:26 AM, rory said:

    They sold you a PAL version probably as they are located on the PAL side of the world?

     

    Well I could .. but have to be warned, I am not sure if this config can be dangerous or not, like a full firmware, if for example did not work for that DVR then it could cause the DVR not to start.

    If you understand the risks and still want to try it, by all means.

     

    It is version N5_V2.606.0.R.100107

    CONFIG_General_Eng_NP_General_WebEng_General_N5_V2.606.0.R.100107.bin

    I used it with LE-A's firmware V2.606.0024.2.R.20101102 and also the newer 2.606.0024.4.R.20110120

    the file name itself has no model number and says General, unlike the firmware files, so perhaps it will work.

     

    Like I said though, use at your own risk.

     

    Attached below

    Use the included software to connect to the DVR over the local network (not internet) then add the file and click BIOS.

     

    OR, put the .BIN file on a USB Flash Drive (Fat formatted) and rename it update.bin then go into the DVR info and version section and click update.

    ConfigNetworkUpgrade.zip

    245292_1.jpg

    like this

  2. Posted

    On 5/17/2011 at 1:26 AM, rory said:

    They sold you a PAL version probably as they are located on the PAL side of the world?

     

    Well I could .. but have to be warned, I am not sure if this config can be dangerous or not, like a full firmware, if for example did not work for that DVR then it could cause the DVR not to start.

    If you understand the risks and still want to try it, by all means.

     

    It is version N5_V2.606.0.R.100107

    CONFIG_General_Eng_NP_General_WebEng_General_N5_V2.606.0.R.100107.bin

    I used it with LE-A's firmware V2.606.0024.2.R.20101102 and also the newer 2.606.0024.4.R.20110120

    the file name itself has no model number and says General, unlike the firmware files, so perhaps it will work.

     

    Like I said though, use at your own risk.

     

    Attached below

    Use the included software to connect to the DVR over the local network (not internet) then add the file and click BIOS.

     

    OR, put the .BIN file on a USB Flash Drive (Fat formatted) and rename it update.bin then go into the DVR info and version section and click update.

    ConfigNetworkUpgrade.zip

    Rory when i dowloaded the file was everything correct but when are in the DVR (0804LE-AS) the titles are with the commands example:%ing_serach% 

    Do you have any solution

    Thanks

×