jimmy29

What kind of settings do you have in EXTERNAL DEVICE tab? In IE you type http://DVR_IP_address:50000

I can't see Network Settings tab. I'm afraid that this DVR is without ethernet interface.

What kind od PLC do you have? Can you make network seedtest on this PLC? Yes you can, max. cable length in ethernet is about 100 meters.

Greetings from Poland

I do not have access to the cameras now. Maybe next service time. Nie mam dostępu do kamer w tej chwili. Może przy następnym serwisowaniu coś nagram.

In this case your protect is only login and password without firewall and router NAT.

I understood that you have public IP address on DVR, is that correct? In this case you don't need to redirect any ports. You have to enter this public IP address on DVR network settings.

Can you give us screenshot from your router and status tab? Cable Modem-----Network Switch------DVR and my question is this real Network Switch without router (NAT)?

VIVOTEK IP8364-C

Do you have public IP address on the router? You can see it in status tab (port WAN).

Do you have public IP address on router WAN?

You have to build wireless bridge with CPE devices, for example 2 Nanobridge from Ubiquiti. Very important is visibility between antennas.

Do you have public IP address from ISP?

What is your address IP on WAN in D-link. Is this public address?

What is your router?

If I understood your ISP has a restrictions on the network right?

When turn on the IR illumination, in your system voltage drop down, which may interfere with the cameras image. Replace the power adapter with a larger example, 12V/5A or use two power adapters instead of one.

Look at the company's offer VIVOTEK (IP cameras) with recording on SD memory card and motion detection. Image is very good on 2-megapixel CMOS Sensor, easy configuration through a web browser, possible streaming by the local network or internet (external IP), ST7501-freeware, Vivotek company also offers wireless cameras.

Will try REMOTE MANAGEMENT it will be good test.

If you have External IP (92.18.38.176) please try with DMZ configuration, unless your ISP is blocking some Web applications in network. Sorry I'm from Poland and I don't know network parameters ISP in UK.

It is simple. Enter only the IP address in the DMZ, do enable, and click save

tried with DMZ in your router?

Enter IP address (192.168.1.200) DMZ in your router. Then try to connect to dyndns domain. See what the results are.

Please try without port number, only address IP if computer is in this same local network (in internet browser)

I think that first time you must plug in camera to router with dhcp enabled and then perform configurations to enter a fixed IP addres. sorry for my english