Jump to content

jon1

Members
 View Profile  See their activity

  • Content Count

    9

  • Joined

  • Last visited

Posts posted by jon1

  1. Posted

    Hi 

    as anyone used a poc.. power over coax dvr. if so are they any good vs a seperate power supply and secondly can one power a 24v ptz ok,

  3. Posted

    50 minutes ago, tomcctv said:

    Hi. You need to switch network off on your pc first so you have just your computer and camera connected ... start menu- type CMD then type ipconfig .... see if it brings up your cameras ip 

    I tried the way you said it didn,t show the ip address. i also tried another ip camera that i know is ok and that one did not show up either 

  7. Posted

    2 hours ago, snagga said:

    I had Qvis Engineers remote accessed the cameras on two occasions, and they weren’t able to reset them either. They told me to return the cameras, as the boards are faulty (???). I spent several days trying all sorts, and after weighing my time and cost, it was more economical to purchase new cameras for the client.

    sorry to hear that. it seems strange 2 cameras go down with the same problem at the same time. 

  9. Posted

    Hi all

    reopening this topic

    i have the same or very similar problem with my ptz it,s the exact same model as this one.it is bricked or something . did this person manage to resolve his problem. 

    they is a factory reset button on the cable connectors it,s the one with the yellow collar covering the blue with the writing on it it says reset x gnd. but mine won,t reset.. i can ping my ip ok i have tried telnet Putty but cannot get past login .. i did try onvif but no luck either.  anyone have any ideas for me to try,

×