Jump to content

MillerP

Members
 View Profile  See their activity

  • Content Count

    1

  • Joined

  • Last visited

Posts posted by MillerP

  1. Posted

    Hi All,

    Happy New Year

    I recently installed a camera so that a customer can check the surf from the comfort of their home (In Cornwall).  The customer would like to be able to view the image from 2 TV's, one in the living room and one in the bedroom.  Getting a cable to the TV's would be difficult and probably messy.  So I am looking for a solution using the existing co-ax network.  

     

    I believe that this is possible through the use of a hdmi modulator, but I am unsure as to how to connect into the coax network.  There is an existing 8 way splitter in the loft next to the CCTV DVR.  So i figure that I can connect the DVR to the HDMI port of the modulator and then run a coax from the existing splitter to the RF in port to allow the terrestrial channels to be displayed on the TVs connected to the modulator.  Is there then a way to connect from the RF out back into the Splitter so that all TV's on the network can view the camera image?  Which port would i need to connect to on the splitter?

     

    Or would i need an additional splitter after the modulator to then go to the TV's that will be used to see the camera image?

     

    Hope that makes sense

    Thanks in advance

     

     

     

×