exahertz
-
Content Count
2 -
Joined
-
Last visited
Posts posted by exahertz
-
-
Hi, i have a odd ball DVR card that i cant seem to find any info on.
anyways... on the card is 4 conexant fusion 878a chips. i installed the WDM drivers for the chips and in device manager they are seen as "Studio WDM video capture". it also installed a lot of other stuff and all of the devices are working properly. i have noticed that all of the Studio WDM video capture devices IRQs are set for 11 but i cannot change anything.
heres my problem:
I use my dvr program Eyeline, and can see four selectable cameras, and in the program i can select all four at once. so the software is okay (im pretty sure). but i can get an image from only one input at a time.
if i have cameras on inputs 1,2,3 and 4
and in device manager i have all four 878 chips enabled
only channel 4 will have an image, and the other three are black
Eyeline will say that those 3 devices are unplugged.
if i have cameras on inputs 1,2,3 and 4
and in device manager i only have one 878 chip enabled
Eyeline will see only that one 878 chip and there will be an image there
if i disable that one 878 chip and enable another i can see another camera\
its kinda acting like theres some sort of conflict.
any ideas????
Thanks, and happy fathers day!
Conexant Fusion based 4ch DVR card problem
in DVR Cards and Software - PC Based Systems
Posted
nm, it was just a driver issue. i used BtInstall from Argus and it seemed to fix the problem.