tripo 0 Posted January 9, 2009 i have recently been involved with moving a control room.briefly the equipment is 50yds from the monitor control room and was ok till air con was fitted in the equipment room.the control room is on a diffent supply to the equipment room.I know if i fed the fuse board in the equp room fromm the f/b in the control room will clear the problem,i have tried a mains filter on the air con,no good and a new supply for the air con is miles away.is there a better filter any can suggest, or anything to cure the problem .problem ,when the air con kicks in thre is a roll going up all 32 monitors.humbugs,not really. cheers tripo Share this post Link to post Share on other sites