toboulet 0 Posted March 19, 2009 have installed lorex plug and play system and am trying to connect an acer monitor to the system as a slave monitor for the point of sale area in my store. I go from BNC on the dvr to a converter and VGA from converter to monitor. All I get on the monitor is input not supported display. So far Lorex is no help nor the converter company. Was wondering if anyone had any ideas to correct problem? Thanks in advance. Share this post Link to post Share on other sites
DaveM 0 Posted March 20, 2009 It seems that a lot of LCD displays are very picky about what resolutions they will work with. I have one that will do 640x480 and 1024x768 but will not do 800x600. The 800x600 is what my DVR put out. See if you can find an old Tube type CRT and plug that one in. If that works, I'm betting that another LCD with more display modes would work for you. Share this post Link to post Share on other sites
Sawbones 0 Posted March 20, 2009 Agree... probably your LCD being finicky. I've had better luck with the LCD TV/Monitors, rather than simply using an LCD monitor. The TV/monitor combos seem to support more modes than regular LCDs. Share this post Link to post Share on other sites
