SambaNoodles 0 Posted November 4, 2010 I have a 16-ch GeoVision system based on the GV-1480, and the 8.3.2 software. As it turns out I need another 4-5 cameras, at least. I am torn between whether I should add another GV-1480 card, or just add additional IP camears to the system (no new card required). Apparently, you can add up to 8 IP cameras at no cost to the exisiting system. I am assuming I will need to purchase a more heavy duty (Cisco) gigabit ethernet switch to the system as well. What is the better option? Another GV-1480 card is going to cost $1000+, while the new gigabit switch is probably about $300-$500. Then there is the cost of the cameras. Any suggestions? Share this post Link to post Share on other sites
Harrar 0 Posted November 6, 2010 No cost for up to 8 Geovision IP cameras. If you use another brand, you'll have to purchase the proper USB dongle. As for a Gigabit switch, not needed for only 8 cameras. 100Mbps is sufficient. Haven't seen any IP cams that require 10Mbps each, yet and if your cams are within 100 meters get the PoE type. Share this post Link to post Share on other sites
