holodeck 0 Posted December 4, 2010 Hi all, hope someone here has one of these cheap generic $60 cards based on the single chip: Nextchip NVP1204 I had now 2 of these cards from 2 sources, different color PCB and different versions of the same software called iDVR4000 or similar. Anyway, the cards install and work fine, but when I remote access the server PC, although it looks like connecting OK (no error messages, like I would expect) I get no images displayed. Ports on my router are opened. I get connection with video on LAN. What I noticed was when the server software starts in the network setup, I see the PCs IP, then after a few minutes see the servers xxx.com, then after some more time finally see the External IP change from 0.0.0.0 to the internet IP address. Just that when I try getting on remotely, just not seeing anything. I used cheap cards prior based on Conexant chips and using some Korean DVRnet software which I would love to find as then I can just use the one client software to monitor 3 different locations. If anyone can help it would be great. Share this post Link to post Share on other sites
holodeck 0 Posted December 7, 2010 Anyone out there? Share this post Link to post Share on other sites
