camtech 0 Posted September 26, 2011 Spectra IV camera does not stop when you take your hands of the controller I have changed the back box and camera and I still have this problem.There are about nine cameras on the system but only this camera has the problem.has anyone had this problem. Share this post Link to post Share on other sites
survtech 0 Posted September 26, 2011 Are you using Coaxitron or RS422? If using RS422, is the dome drive's termination switch to "ON"? SW2 Switch 10: Termination Setting When connecting more than one Spectra IV dome system to a single controller, terminate the unit farthest from the controller. Termination is only required for the last dome in the series. The dome drive is shipped from the factory in the unterminated (OFF) position. To terminate the dome drive, set SW2-10 to the ON position. Share this post Link to post Share on other sites
