destro_23 0 Posted January 6, 2012 i have a 1008 that i'm installing and when i autosearch for ip cameras it finds the vivotek 7138 and and an Acti... the acti 4201 connects fine.. the vivotek does not connect at all... even though it sees it. With the system i'm replacing a NV5000 card.. the same ip/port works just fine. any ideas? i have latest updates installed Share this post Link to post Share on other sites
destro_23 0 Posted January 6, 2012 i reset the vivotek to stock... and it worked... turns out the camera needs to stream in mpeg so max of 800x600 as opposed to jpeg 1024x768 with this specific camera. Share this post Link to post Share on other sites
destro_23 0 Posted January 10, 2012 ok it worked on my home network... now i plug it back into my comcast business router and to doesn't work... i'm really stumped here.. my home is typical 192.168 and my business is 10.1.10 and both times the 1008 can autodetect the acti and vivotek with no problems. It can always connect to the Acti on both networks It detects the vovotek on the 10.1.10 but can not connect.. WTF? Share this post Link to post Share on other sites
destro_23 0 Posted January 12, 2012 ok after just letting it sit there for 20-30 min... it connected... and after a few reboots it still connects.. so who knows? lol i'll leave it be. Share this post Link to post Share on other sites
