MrWhite 0 Posted January 9, 2012 Anyone know of anyway to view geovison cameras on WP7? I won't even work when I travel to it on the Internet Explorer Share this post Link to post Share on other sites
CCTV_Tech 0 Posted January 24, 2012 Anyone know of anyway to view geovison cameras on WP7? I won't even work when I travel to it on the Internet Explorer Personally, I load UltraVNC on my Geovision DVR and run a VNC client on my iPhone (Mocha VNC). I have been using this solution for several years for both GeoVision v6 and v8, and even on my old Netrome DVR. VNC works fine, except it does not do audio. Since UltraVNC runs on any PC as well, for years my security monitor on the kitchen counter was an old laptop running UltraVNC. Share this post Link to post Share on other sites
MrWhite 0 Posted March 7, 2012 Why do you VNC into it and not set up the ports to enable the software? I can remote into the system with other apps but i'd rather dial in with a dedicated app to just load cameras Share this post Link to post Share on other sites
MrWhite 0 Posted June 14, 2012 For anyone interested there is an app for WP7 called IP Cam Controller that will work with Geovision! Share this post Link to post Share on other sites
tomdlgns 0 Posted July 2, 2012 this seems to be a very common issue. VNC should NOT be used to remote view the cameras. even if you do get it to show your cameras, viewing them in vnc vs the proper program/browser is probably going to consume more bandwidth and produce lag. Share this post Link to post Share on other sites
