PeterW 0 Posted January 27, 2012 Hi Guys. We have 4 cameras attached to out CP Cam CPD 500w System. The cameras are aslo CP Cam units. When installed, the 2 external cameras, had a number of red leds lights. They have now gone out. The camera's are still coming up on the monitor, however in mono, not colour. Any ideas Share this post Link to post Share on other sites
Soundy 1 Posted January 28, 2012 Were these cameras in color previously? The LEDs will normally only turn on when it gets dark out, and if it's a color camera, the camera should switch from color to B&W at that time... if the LEDs aren't coming on, that could mean the driver circuit has failed, or the light sensor has failed (sometimes SOME of the LEDs will fail, but ALL the LEDs themselves failing is highly unlikely). If the camera is staying in night mode, that could also point to a failure of the light sensor. Either way, your best bet is probably just to replace the cameras. Share this post Link to post Share on other sites
beckosecurity 0 Posted January 29, 2012 Yes. There may be something wrong with your light sensor or driver circuit. Share this post Link to post Share on other sites
