bigguy6907 0 Posted May 18, 2012 I can install an older drive into the DS DX9 with no problems. I know how to it and have done it many times. Is there any known issues with The drive is 80GB, Western Digital WC800AAJB Desktop/Caviar 7200 RPM with 8 MB cache ATA/100 with 40-pin IDE connector The Drive is marked as a PATA I've tried several drive and it halts in Boot Loader. Boot Loader is 2.0 (001). I can pull out an old drive, format it, install the software and install the hard drive and everything works fine. Colt Share this post Link to post Share on other sites
cctv-dave 0 Posted December 13, 2012 They are actually SATA drives with a SATA <--> PATA convertor built onto the drive PCB. A bit cheeky really. The controller used is not compatible with DM kit. The Marvell convertors work best with any SATA drive, expect with ECO4 and D4 units. Share this post Link to post Share on other sites
