cctvlad 0 Posted September 17, 2012 Hi all need some help on a job , Don't usually go for wireless kits for cctv I've had to because of the distance from the house to the farm yard. ok. I've purchased two 50mw 2.4ghz transmitter and receivers. one is 20 ft away and the other is 423 ft away the receiver box is custom made with antennas outside of it and they are like 10 inches apart. the garage camera (20ft) is at channel 1 and works perfectly. the shed camera (423ft) is at channel 3 and picture just comes as noise and sees channel 1 momentarily and goes away. however if i put it at channel 1 the picture gets stronger with them both in conflict and I see the shed its almost clear but its a picture thats in pulling at each other. why can i not get a stable picture at channel 2,3 or 4? is the transmitter out of range or is the receivers too close to each other? Share this post Link to post Share on other sites
