chucky 0 Posted July 29, 2013 A question for anyone that is using the latest ACTi NVR software. For live viewing lets say 16 cameras. Instead of displaying all 16 cameras at once on your monitor (checkerboard). Does the software have an option to display each single camera full screen? Possibly with a timer allowing 5 - 10 seconds before displaying the next camera. I have seen this setup on analog DVR's. Thank You Chucky Share this post Link to post Share on other sites
grege 0 Posted July 31, 2013 Chucky, An engineer with ACTi was giving me some other help so I asked him your question. Here is what he said. Yes, to achieve the goal, you will need to create a view for each camera, then add those view into a tour (with timer 5~10). Steps to setup: 1. Choose single view and drag your first camera into the layout. 2. Click Save View at top and name it camera 1 (or anything else you prefer). 3. redo the same steps to rest of your camera. 4. Click on Tour button at top (next to view section). 5. Create New View and select Device Group, then set timer duration (default is 5sec). Click Apply. 6. Click on Tour again to enable the New View Tour that you just created. Hope that helps Share this post Link to post Share on other sites
chucky 0 Posted July 31, 2013 Greg I appreciate the feedback you provided from ACTi support. This is the exact information I was seeking. Thank You Chucky Share this post Link to post Share on other sites
grege 0 Posted July 31, 2013 No problem. I was curious if you it was possible for future use and was already talking to them. Share this post Link to post Share on other sites
