dualcomp 0 Posted March 6, 2006 Hi! Can anybody help me with a pic or doc for wdt-2016 digital i/o connector pinout? I read that there are 16 inputs and 8 outputs, but I don't know how to connect them. Rgds, Mihnea Share this post Link to post Share on other sites
MattVidionics 0 Posted March 9, 2006 I have a Anykeeper wdt-2016 card with input/outputs. With my system I have a seperate I/O board plugged into this port. The card which I have mounted on a board outside of the PC, has 8 relays and 16 opto-isolated inputs. I cannot help with the pinouts unfortunately, but its much easier with this additional circuit board. I would suggest contacting someone selling anykeeper/koditec boards and see if they can sell you an I/O card seperately. Matt Share this post Link to post Share on other sites
timeaxis 0 Posted May 14, 2008 You connect it furthest to the recepticle farthest away from the back of the computer ... so its the second connector away from the metal part which is the back of the computer... if you dont know which way the cable goes in... and the cable doesnt have the tooth stop... you will have to compare where the tooth stop is supposed to go according to the red line on the edge of the cable, and install it accordingly how it should go. Share this post Link to post Share on other sites
