pjwinstalls 0 Posted July 18, 2015 I have a DNR400. I also have a fios router. Port 35000 is being used by one of the fios set top boxes on my network so i changed the port to 35006 and forwarded the port. When i do this...i can view the cameras sometimes but i can no longer pull up any websites on the computers on the network. most of the time, i cant access the cameras remotely at all and the internet stops working. As soon as i unplug the NVR....my network starts operating normally again.. Any thoughts on what could be causing this? Thanks! Philip Share this post Link to post Share on other sites
Boogieman 1 Posted July 18, 2015 I have a DNR400. I also have a fios router. Port 35000 is being used by one of the fios set top boxes on my network so i changed the port to 35006 and forwarded the port. When i do this...i can view the cameras sometimes but i can no longer pull up any websites on the computers on the network. most of the time, i cant access the cameras remotely at all and the internet stops working. As soon as i unplug the NVR....my network starts operating normally again.. Any thoughts on what could be causing this? Thanks! Philip You will have to post the network setting page of the NVR and your port forward settings on the router..most likely you have something set inccorectly. Share this post Link to post Share on other sites
pjwinstalls 0 Posted July 18, 2015 I attached two pictures....one from the NVR and the other from the router. The the port forward of 35006 in the one i manually put in, the others below that are ones that are being put in from the NVR via UPNP. thanks for the help..... I am used to doing dw spectrum and hikvision nvr.... this one is foreign to me. Share this post Link to post Share on other sites
Boogieman 1 Posted July 18, 2015 disable upnp...disable all the added port forwarding except for 35006... Share this post Link to post Share on other sites
pjwinstalls 0 Posted July 21, 2015 Ok...did this... internet worked normally and cameras were accessible for about a day and then same problem occured... internet stopped working until camera server unplugged. any other suggestions?? Share this post Link to post Share on other sites
Boogieman 1 Posted July 21, 2015 Ok...did this... internet worked normally and cameras were accessible for about a day and then same problem occured... internet stopped working until camera server unplugged. any other suggestions?? Post a new image or your routers port forward settings. Share this post Link to post Share on other sites
msnow 0 Posted August 4, 2015 Instead of using any ports in the 35000 range, try the 10000 range. Verizon may be trying to keep the 35000 range reserved. Share this post Link to post Share on other sites
