TurboGPX 0 Posted September 6, 2015 After upgrading my Hikvision cams from 5.1.0 to 5.2.0, night view is a mess. See attached. Share this post Link to post Share on other sites
Boogieman 1 Posted September 6, 2015 After upgrading my Hikvision cams from 5.1.0 to 5.2.0, night view is a mess.See attached. What is your exposure set to? Turn down noise reduction.. Share this post Link to post Share on other sites
TurboGPX 0 Posted September 6, 2015 After upgrading my Hikvision cams from 5.1.0 to 5.2.0, night view is a mess.See attached. What is your exposure set to? Turn down noise reduction.. Just downgraded to 5.1.6 last night / this morning at 5AM. I will wait and see what happen tonight. Share this post Link to post Share on other sites
MaxIcon 0 Posted September 6, 2015 Your image shows motion blur. This is typically not a version problem, but an exposure time problem, which is why Boogieman asked about that. Anything slower than 1/30 second will give you motion blur on normal walking speed objects but gives much better image quality in low light. 1/30 second is good for walking speed, but runners and other fast moving objects will still blur, and low light images start to get noisy on the Hiks. 1/60 second gives little motion blur and a good bit more noise. Here's an example of running speed motion blur on a Hik 2032 set at 1/30 sec in decent lighting: Share this post Link to post Share on other sites
