Jump to content
mcs

Storage issue

Recommended Posts

I have a gv1480, running core2 duo- has 3 x 500gb hdd's,

when I set this up it was getting nearly 1 month backup,

 

It had to be formatted as a staff member was "playing", I stuck a 10gb hdd in as C: just so I could quicly load an image if it was "played"with, but I also turned on KEYLOCK..

 

 

Now we get 8 days,

I have checked and rechecked, but dont know why its gone down so low for backup time?

 

all drives are enabled, cept 20gb part on one drive for "Backups", I like to keep a copy of most events in case the burn didnt work, but also for fun

 

 

 

anyone got any super ideas wot this could be?

 

cheers

Share this post


Link to post
Share on other sites

Are you definitley using the same compression and motion settings? I find the Geo H.264 gives a LOT of recording time, so perhaps this is different. Other then that, it should be about the same.

Share this post


Link to post
Share on other sites

Are you sure its the same compression, as already mentioned, and also 720x480 will be much larger files than 640x480 so make sure you are using the same Video Resolution.

 

I would check the hard drives are still being used though. Just incase, remove them from the list of storage devices, reformat each one (if you are allowed), repair the DB, reboot, add them back in to the storage list, repair the DB, then try again.

Share this post


Link to post
Share on other sites

I just logged in remotely and found cam1 was on geo h264

and the rest were on mpeg4,

 

so sorry my bad

Should have taken more notice, keeps most settings cept the compression...

 

cheers

Share this post


Link to post
Share on other sites

Haha, I've forgotten to click the little hand before too to apply to all cameras. Cheers.

Share this post


Link to post
Share on other sites

Yah

Id set it up on the orig install

But when I reinstalled and went back for this and that

id forgotten to check it , so all cams were using the same compression

 

My bad

Ill admit I overlooked it..

 

cheers

Share this post


Link to post
Share on other sites

That does show just how effective the Geo H.264 compression codec is in terms of size.

Share this post


Link to post
Share on other sites

I never use H.264 and i get alot more than 8 days ...

but it will depend on the cameras also.

Share this post


Link to post
Share on other sites

well this has 12 cams

busy service stn

has 2 cams on Driveway for evidence people go in and pay or not

All cams are Samsung

730's and even some 310's

 

Its on qty of 5

sens of 9 on each cam, for max effectiveness

There is no point having cameras and then d/ging the quality on the dvr in my mind

 

Id prefer to have 8 days of max res, max qlty then 60 days of small screens you cant read or identify anything off,

 

And it is because the compression is in a totally dif screen,

heres a note to geo to include on main config page ...

cheers

Share this post


Link to post
Share on other sites
That does show just how effective the Geo H.264 compression codec is in terms of size.

 

 

Yes if you go by the calculator in the advanced tab, you will see for yourself

 

Share this post


Link to post
Share on other sites

yeah gas stations do eat up hard drive space .. 24 hours a day .. I have one here with 16 cameras, they get approx 9 days with a GV800 and 600GB of hard drive space on Geo Mpeg4 .. they are basically busy 24-7 though some cameras are dead at night such as out back and in the fridge areas.

 

But i wont use H.264 even if I was paid to ..

 

only for the webcam ..

 

Hard Drives are so cheap these days. .. .

Share this post


Link to post
Share on other sites

Hey Rory, do you really find the difference in video quality is that big? Personally, I've used it a lot and haven't really noticed any difference. I've taken jpg's from both codecs to compare and there wasn't a major noticeable difference, especially when you consider you get 2 to 3 times the recording time. What did you find was the issue with it, just too pixelated or blurry?

 

What codecs do others use?

Share this post


Link to post
Share on other sites

Yep big diff. I use only Mpeg4 now, its the best quality Geo has left.

I wish I could go even less compression.

 

HDD Space is soooo cheap now, they need to do an about turn and go higher quality and less compression and stop worrying about the HDD space it takes ..

Share this post


Link to post
Share on other sites

remember tho.. even h264 saves alot of space but only capable of max 240fps

 

just get more hard drives

Share this post


Link to post
Share on other sites
Guest
Yep big diff. I use only Mpeg4 now, its the best quality Geo has left.

I wish I could go even less compression.

 

HDD Space is soooo cheap now, they need to do an about turn and go higher quality and less compression and stop worrying about the HDD space it takes ..

 

Halleluja!

 

 

JD

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

×