Securame

Can't tell you, sorry, I do not use Smart PSS. I have tried it, but it seemed lacking; like it was still beta, in development, I think it is still missing features.

For Dahua, you have to use SmartPSS for P2P access. PSS does not support P2P (and I doubt they will update PSS any more).

With Hikvision? Please ellaborate, since I am quite sure that can not be done (or at least I have never been able to do it). You can not even do two overlaping programming periods. If you try to do from 00 to 24 continuous recording, and from 06 to 18 motion recording, it will not allow you to save the schedule.

Hikvision and Dahua do. Not all of them, it depends on the software. That NVR does not have alarm inputs/outputs; at least not on the back. No idea on what a "alarm box" is, something you buy if needed? You should ask them, or check the manual of the unit. The RS485 is for PTZ cameras, not related to alarms.

P2P is not better; but it is easier. When connecting to a device with P2P, connection is slower. You are also relaying on third parties (which means that sometime in the future p2P for your device might actually stop working). For the end user, sure they prefer to scan a QR code with their phones, and be done with it. My devices? I know all of their IPs and have all the needed ports open, because I do know how to do it. I will not use P2P myself, but I understand why many people want it. No idea on what "cloud id" is. And if any ISP does not allow to forward any ports, I would just switch ISPs.

Will check it. Thanks! Edit: readme.txt inside Firmware Version: v5.2.0_141024 Compatible Models: DS-2CD2412F-IW, DS-2CD2432F-IW, DS-2CD2512F-IWS, DS-2CD2532F-IWS Update Information: 1. Fixed plug&play does not work bug with DC power input. 2. Fixed WiFi cannot connection bug when upgrade to v5.2.0_140721 via wifi.

Strange. On displays with many cameras, iVMS-4200 changes stream when you make a camera full stream. That is, when you are viewing the camera small, you are actually seeing the substream. When you double click the camera to make it full screen, after a moment you will see the feed change from substream to main stream. Sometimes I have seen IP cameras take a while to show up, but if the connection/network is good, there should be no problem. And if you can see the main stream, you should not have a problem with the substream.

You do not need to "add" any cameras, since you already have them added (they show automatically when using the POE ports). It can not find any camera, that is correct, since all the cameras you have are already added (it can not find any more cameras on the network). If you go to the PTZ tab, you might get a message saying that, since you do not have any PTZ cameras. You will not flip the image on the PTZ tab...

That is called P2P (peer to peer).

Not possible

Both Hikvision and Dahua, first screenshot is Hikvision iVMS-4500, second is Dahua gDMSS. You have to look for devices with alarm outputs.

Here is how to do it from iVMS-4500 (mobile/Hikvision) and DMSS (mobile/Dahua). When you are using a device with alarm outputs, you can turn them on/off manually. The Hikvision device I am using has 4 alarm outputs, the Dahua device has 3 alarm outputs. You can also do so from the tablet version of each program (iVMS-4500 HD and DMSS HD) and from computer (iVMS-4200 and PSS/Smart PSS). From web interface I think you can only do it with Dahua, at least with Hikvision I have not found the option.

Oh, thought so... A 24ch Hikvison would have been quite rare. I think the only 24ch/32ch model Hikvision manufactures is the 73xx series, which is not cheap: http://www.hikvision.com/europe/Products_show.asp?id=9865 You could also use 2 16ch. From Hikvision software you can replay channels from both at the same time, but from the web interface you would not be able to do so. You have lower models, but 7216HWISH is a good unit. http://www.hikvision.com/europe/Products_show.asp?id=9631 From Dahua you also have 32ch units, but I can not tell you about their software, I hardly use it.

You can do so easily with any Hikvision and Dahua device that has alarm outputs (be it DVR, NVR, IP camera). Sound a siren, strobe light, open/close a gate, turn on/off lights, etc. You can do it from mobile, tablet, and PC.

iVMS-4500 should connect to the PC with iVMS-4200 PC NVR, or to every single camera if you only want to see live video (and no recordings). For the first case, you need to port forwad the needed ports to the PC NVR. For the second case, you would need to port forward to each one of the cameras, which would be a bit of a mess. By the way, your network config sucks. Two subnets? And a computer connected to two wifi networks? Really?

I doubt they do any recording. They seem to just be taking a snapshot of the camera whener you try to see it, that is why the site loads so slow. I did watch some snapshots, and they all showed the current date/time. I do not think they have any reasons to keep any screenshots/recordings. I also have my devices warning me when there is a failed login attempt. I never get any warnings (I do not use default ports). What I have seen is that a failed login attempt on the device does email me a warning, but a failed login attempt on the RTSP ports does not. So if someone tried the default login/passwords on any of my open RTSP ports, I think I would not even notice.

What Hikvision model do you have? Do you playback from the web interface, or from iVMS-4200? With current models you can easily playback at 2x 4x and 8x. From both web interface (IE, Firefox, Chrome) and iVMS-4200. You do get a list of files, but also a nice time bar where you can easily move.

Oh, ok! I thought you meant that you had already got it working before, but did not post back. Nevermind then! I still have not tried. I do have some RTSP cameras, but I have no need for recording them. Did you try if you can do motion detection with RTSP? (I guess you can not)

It's not difficult. First one will probably take more time, next ones should be easier. You will need to configure each connection, do port forwarding on the routers, configure DDNS (you have free DDNS with Dahua IP cameras), etc.

LOL, then you could have reported back already... Share!

What I was looking for, thanks! I have no problem with DVR 2.x, DVR 3.x, and IPC, but I wasn't able to get RTSP working with my NVR. It is strange that I can use the substreams with no problems (like 102), but I can not get the main styreams to show up (like 101). I do connect, but VLC will just sit there forever. But it is surely better than nothing, so I do not have to open the RTSP ports on those IPCs one by one.

I just updated my 7716NI-ST to the latest version (3.3.15), and maybe it is possible now. See screenshot. I haven't tried it yet, but it does seem you can add RTSP streams.

The fact that a camera is for local market (chinese) or for export market (international) does not come from the color of the box. You can find chinese products with brown or red/white box, and you can find international products with brown or red/white box. But product for local/chinese market is cheaper. So there are chinese vendors who get the chinese product, patch it, and sell it with english language. With these products, if you do not know what you are doing and try to update/change the firmware, you can get the product back to chinese language. Yes, if you download an international firmware, as you call it, when you install it on a product that is supposed to be for the chinese market, you will get the product back to chinese language.

It can be done, if the upload bandwidth on each location is enough for a 1080p stream, and the download bandwidth on the recording location is enough for receiving all those streams. I would say at least 5mbps upload on each site, and 25mbps download where recording. Keep in mind that any problem on the connections will affect the recordings (if the connection goes down, if the connection is used for other things besides CCTV, etc).

viewtopic.php?f=1&t=41587 http://www.networkworld.com/article/2844283/microsoft-subnet/peeping-into-73-000-unsecured-security-cameras-thanks-to-default-passwords.html