bongofury
-
Content Count
89 -
Joined
-
Last visited
Posts posted by bongofury
-
-
i know Divis has these. some of their cards used to come with this harness. I have a couple left over i've never used. PM me if you want them. I think geo has these available too but i think theirs are expensive.
good luck on your search
-
there are a few softwares that you can buy that will work with kodicom cards.
such as this one - http://www.h264soft.com/h264webcam.html
but i don't know if all of them will support 8 channels with your card.
Perhaps someone else will know.
-
welcome Safeware.
We're neighbours! Kingston Ontario
-
don't forget to try a small monitor near the camera and again near the dvr to see if it looks any better!
-
if this is a standard camera (non-ip) i would try a small tv or cctv monitor right at the camera to start. if thats ok, try the cctv or tv at the dvr end of the cable.
could be alot of things, but that is where i would start.
-
i think you already know this is not going to be supported.
best to stay with ver 7.05 with that one.
-
-
Avtech is one of the better budget brands. its a good value if you don't have much to spend.
-
You could try H264Webcam software. It will supposedly work with a PICO2000 card and is not expensive. They have a trial demo available.
-
Looks to me like it is similiar to chance-i Divis DVR software. You might get lucky and just try their standard software. Might work!
-
I had a 120A16 Divis card with channel 6 that went bad ( no signal)after 2 months use. It ended up being a tiny shorted capacitor on the input. replaced and it was fine.
-
-
Looking for small Point of Sale program that works with Geo
in Geovision
Posted
If a cash register will suffice, any Sam4s Cash Register such as ER650 with a serial port will work.
choose Star TSP200 emulation as this has no formatting.