andy

Yeah, the passuninstall will only work if you had the allow removal .... option checked. For the programmers out there remember that that value has to be written somewhere... Also, yeah I mean a windows reinstall.

Haha, I don't remember ever seeing a RTFM answer on here before. To answer the question though: yes, most of us know how to set up remote view with a dynamic ip.

The password was in the registry last I checked. Seek and ye shall find. But, a reinstall is probably your best bet since you don't really want to be mucking in the registry unless you know what your doing.

I don't know if it was a dream, but I remember using Sandra by SiSoftware. This is basically a benchmarking utility, but I swear it had an in-Windows burn-in utility. Might be worth a look.

If your register has a builtin printer you should be able to feed off of the ribbon cable that attached to it.

If I was a betting man I would put some money down on system addressing on the Keyboard. Did you double check that?

These are only for v2 and v3 boards. If you have a v3.3 or above you don't need the dongle since 7.x is all you can run.

I wonder if temporarily changing the %windows% or %system% path when installing would work. Or, maybe adding the second drive. Ahh, nevermind this is what no sleep in a week will do to a man.

Yes and Yes

You can go straight to the 7.x software with the USB Dongle. No need to upgrade your card. But, you won't be able to use 6.1x software.

In reply to the original post, yes you need a modem. You'll also need a SIM chip from a wireless provider. You should be able to get a model # from Geo Tech Support.

Yes it does work. The most important thing to keep in mind is that this feature is not meant to be used in an area with heavy traffic. If the parking lot isn't too busy then it would work fine.

I stand by my initial question. Don't know if it was noticed.

You can always use a switch, but if your gonna do NIC to NIC you need a crossover cable. You'll get nothing with a regular patch cable.

If you have a V2 POS Box, be aware that the DB25 port is actually an RS232C port (serial). If your trying to plug that into a parallel port it won't work.