Jump to content

vadimo

Members
  • Content Count

    20
  • Joined

  • Last visited

Everything posted by vadimo

  1. does anyone know where to download such alarm or create them? i need one that says: 'warning video loss' thanks
  2. Hi all, Im having strange intermittent problem with 2 cameras: its in shop, 2 cameras far apart run on cat5 with baluns to DVR. Once premises lights go off typically after 18.00 - cameras start to show bad interference, during 18.00 - 09.00 hours it will show good pictures again for short time and then by 09.00 its bad again, lights gets switch on just after 09.00am and cameras start to show good pictures. I think the point im making is the pictures goes bad only when light is reduced. Is there anything i need adjust on cameras? I also suspect problem with baluns? Any info would be great! Thanks
  3. vadimo

    Avtech KPD675ZC Questions

    if i was you, contact manufacturer directly http://www.avtech.com.tw/support.aspx?Type=3
  4. vadimo

    AVC796ZD Firmware

    good old dropbox
  5. i never used avtech and wonder if they are stable dvrs? it also claims to record D1 at 25fps.
  6. vadimo

    Kortech DVRs

    has anyone tried this brand dvrs? for instance: http://www.korcams.com/Kortech-4-Channel-DVR.aspx http://www.korcams.com/Kortech-9-Channel-DVR.aspx Wondering if its any good, needs something with good quality and mobile phone support Thank you
  7. Im big fan of WD HDDs and been using Green and Black Caviar 2TB for 2 years. I been building custom PC based DVRs for few years using same software. I decided to try new WD model, so purchased 6 of WD20EURS (AV-GP) http://www.wdc.com/en/products/products.aspx?id=150 I thought they sound great: for DVRs 24x7 reliability! So i upgraded 2 existing Windows 7 based DVRs. After 1 month myself and customers noticed that when you view CCTV recordings, some dates, the recordings playback skips by 40 seconds and very slow access time, 10-15 minutes waiting for recordings to load. Called WD support, their technician told me i should not be using AV and go back to Caviar Black. Anyone else out there?
  8. yes i thought that too but i was recording continues mode, all happy now with black caviar HDDs
  9. whats the longest continues run so far you have on the black ones? i found that if greens fail they do within first 3 month or so, oldest greens i have are about 11 month.
  10. AF tool only required to be run on Windows XP. Windows 7 can handle 2TB drives without use of AF tool. I will check TLER out of interest. Thanks
  11. I have a pre-buyout Hitachi 2TB drive, and on a couple of occasions I have experienced symptoms similar to yours. In both cases the problem turned out to be a bad block on the HD. Normally there are enough "spare" blocks on the disk that the firmware in the HD can remap the bad ones automagically. However, once you run out of those built-in spares, you have to map out any additional bad blocks yourself. My system is Linux-based, so all I had to do to fix the problem was force an fsck and reboot. Dunno how you would accomplish that under Windows 7, but I'm sure someone else can advise you on that. HTH. my issue was on all 6 HDDs, it would be ultimate bad luck if i was to have faults on all. Never the less of course i run chkdsk, there are no faults found and windows logs looked clean too.
  12. Yes. Sounds like Belden 8279 http://www.belden.com/techdatas/metric/8279.pdf Jacket should be marked. You will need the correct BNC connector. 8279 is slightly smaller than 59 and has a clear-milky dielectric as well as a stranded center conductor. thanks i will make note of this
  13. i have come across what looks like standard RG59 cable but with one differences, the center core is soft made out of strings of copper. I tried to crimp it with my standard RG59 BNC Male connectors and crimp tool but found that center pin can come off with little force. I wasted 10 crimps and tried cutting the inner insulation as clean as possible (without loosing any strings of center core) but made no diffrence. Is there a spicific type of BNC connectors to suit this cable? Thanks
  14. The cable could also be URM70, still 75ohm but very slightly smaller than standard RG59 and with a stranded centre core. With quality cable it delivers around 3dB/100m loss at 5MHz Ilkie ahh i see, i did google based on name you gave so here some BNCs http://www.qedltd.co/products/RG59%252dURM70-Male-Bnc-Crimp-(Bagged).html Looks like hard to get them, but i will try thank you
  15. I have 20 coax cables to go through thats 40 crimps, i cant be doing this soldering. Im looking for this cable type name and BNC to fit it PROPERLY if you know? Thanks
  16. same here! i have seen WD state that Green edition has been tested with RAID 1 and 0. I tried it and it failed over soon after.
  17. i can say that Green Caviar been 2TB been working well for me in last 1 year since i started using them. Having said that there has been couple faulty ones but hey they are well priced for what they are. As for Blue Caviar - im staying clear off them, they are too weak in perforamnces. The way i see is a lot depends on what software you use (the way it write/read), compression, fps, number of channels and what recording mode: motion only or continues..... As for my AV drives problem, WD are miss represeting them in media. I will fight WD to get my money back!
  18. has anyone ever heard of them or had any experience? I have 4 ch card that i lost license to activate it with the software. company used to be partners with http://www.cctvmobile.com/surveillance.php Thanks
  19. I have about 12 x IK-WB15A installed. After 2 years i re-visited site and now see that most of the cameras have diffect: on inside of clear bubble plastic cover there is like a patch of smudge, its not dust! I noticed the patch is only where the lense and cut section seat in home position, i can only think that its the heat comming from the solid state components and exiting via lense cut section on to the bubble cover Problem i have is you cant take these cameras apart, 2 pcbs seat on top plus all the moving parts inside, i cant even twist the bubble. Anyone else has such problem? PS: they are powered using supplied PSUs not via PoE switch Thanks
  20. regarding windows 7 pro: has nayone tried using windows xp mode? Im about to try that tomorrow! http://www.microsoft.com/windows/virtual-pc/download.aspx
×