hammerjr

-It is still generates high frequency noise in IE while it is connected to the DVR and the Video Viewer too while it is running. -can't play back the audio from the saved files -converting to AVI is not good, codec does not matter This software is a piece of ...

It is a bit better but far from perfect. Something is not OK with the playback algorithm.

Yes, I know about AVC796A and AD but I am not sure that the firmware v.1019 for AVC796/AD is compatible with my AVC796ZA. ps: The firmware version what I wrote above is correct.

Thank you for your reply. I tried to find a new firmware for this unit but nothing actually I have not found so much information about it (AVC796ZA). The firmware is 1001-1001-1000-1000

Hi, I currently use the latest version 0.1.6.9. The most annoying problem is that it can't playback the audio layer what I have saved to my computer via LAN. The live audio is transmitted from the DVR to my PC. (I selected the correct audio channel) The second annoying problem is that when I start the application or I login via internet explorer then I hear a very high frequency constant noise. (I am sure that it does not come from any microphone because the noise is audible immediately after I start the video viewer until I close it, I do not need to login to the DVR). When this video viewer is running until I can't listen to a music from my PC because of the high frequency noise and because of this software damages all audio output. Yes, somehow it changes all audio output.

Hi, I replaced my old 4ch mpeg4 AVTECH with this new AVC796ZA 8ch DVR. The problem is that when I am playing back the videos then the channels are out of synch. I have some cameras which shows the same place but from different view. The moving of the same people or car is in delay comparing to the another camera. Example: moving: <----------------------------------------------- from right to left setup: ----cam1-------cam2---------cam4----------------- The moving of the car is from right to left. I see the car first on cam1, then on cam4 and a bit later on cam2. The good order would be cam2 and cam4 at the same time then cam1. The delay of the cameras are not always the same, it is random between ~0.1 to 2 sec. What can cause this problem? The DVR is completely useless with this "feature".