meck11
-
Content Count
16 -
Joined
-
Last visited
Posts posted by meck11
-
-
mobotix d12 clear and smoked dome looking for 1 of each of course not scratched
-
can some one explain tftp and has anyone used that format with what software
i understand aercont will get faster frame rates with tftp
-
what I find hard to understand is why their spec say
1280x1024 30fps
1600x1200 24 fps which the max i can get is 9fps
has any one been able to achieve higher frame rates and with what software and hardware
-
Still no luck with framerates still max out at 9fps
Anyone able
e to post higher rates and eguipment
Your using
also looking at axis 1344 any opinions
On this model
-
just av100
whats pm
-
oops my mistake directly connected to the computer no hub
same results
-
by passed the nick directlly connected
it seems iam not alone in this issue as per previous post made can someone post their results fps along with computer on nvr setup and maybe firmware along with hardware on their aercont or ganz
thanks great site
-
I would run visec along with av100 to watch fps
the frame rates would double for a second than drop back weird
-
turn off moonlight goes up .5 frame rate
-
Moonlight. For. Night. Changed settings to highspeed no real change.
-
Not much really doesn't change any one able to post what they were able to get for god along with software used thanks for the inputs
-
why then when I reduce to 640x480 frame rate stays the same goes up .5-1 fps
megabyte rates drop but frame rates dont go up much
doesnt matter what resolution setting frame rates still close to 9fps for 5100 series
14 fps for 3100 series
Ima wondering if this is a firmware issue
-
aercont software av100
tryed alot of different demo software as well stil lousy frame rates what is your experince what are you using and what type of frame rates are you getting
-
directly no hub intel i7 2800 8gigs ram
tried in intel centrino laptop same frame rates
has any one been able to get stated frame rates by aercont/
-
I currently running 2 ganz 5105 which are rebranded aercont and 1 3100m aercont
Why do the get such low fps 9 fps for the 5105 and 14- fps on the 3100
this is when i connect directly no firewall etc
turned brightness way down no change, tried different settings all the way down to vga
changes slightly not much +- .5 fps
any one had issues like this and what was your outcome
thanks pretty new to all of this
mobotix d12 clear and smoked dome
in Classifieds
Posted
washington