stealthrt

The free version allows 8 up cameras.  
 

and all of the settings for each camera are identical other than their IP address. 

1 hour ago, tomcctv said:

That’s a securplug ptz 

you need to change the software your trying to use 

I will send you a link …. Click on software download first …… then click on your camera model number for setup

 

But that doesn’t explain why one works when the other 3 do not?

20 minutes ago, tomcctv said:

Ok your link has not worked

what make are your cameras and spec 

No name branded.

1 hour ago, tomcctv said:

Hi what cameras are you using?

pic also shows your setting up as h265

They are your typical Chinese IP POE ptz dome cameras.

Hey all. I have been trying to setup this Luxriot EVO free edition for hours now and still am not able to get it to display my cameras.

The first camera I added seems to have worked when clicking on the camera name and then clicking on Show video in the Channels section:

I created a channel for it called Cam Channel Group and placed the Cam 223 into it:


In the Monitoring tab when selecting the Devices menu I have a working camera.

And on the Channels menu I again confirmed I have a working cam:

Lastly on the Streams menu I have a good cam:

Ok great. I confirmed I can view the camera and that the camera is setup like it should be.

When I start up the Luxriot EVO monitor I am unable to find it ANYWHERE!

Nothing at all is listed under the Channels menu when, I would think, my Cam Channel Group should be listed?

If I go back and add a second camera it then tells me Unauthorized (401)...????

And the Channels menu in the monitoring tab looks like this:

I made sure both cameras had the identical settings via their web page and they do. I also tried my other 2 cameras just to make sure it wasn't a fluke but was greeted with this:


So this is where I am stuck. Any help in getting this to work would be great because I really like the program (What I can run on it that is))!

 

Mace bought Exxis, and yes that is designed for that camera.

 

Sent you a PM regarding an email to send the pinout to.

Sent you an email!

David

Yes it would appear they share the same ground, most board cameras do, Ive done this before in the past.

Ive even had to share the audio ground before also. But in this case it seems it has its own?

Anyway, do this all at your own risk as I have not used this camera.

Thanks for the feedback, rory Wish i knew for sure what the pin layout was, though!

David

Hey all i am new to all this sercurity cam stuff and i have 4 Exxis cameras that have a RJ11E end on them. I have a DVR card in my PC that only accepts BNC connectors. I was looking around seeing if i could find the pin out for the RJ11E connector but have been unsussessful. The only thing i can turn up is this:

pin#

1 speaker (hot)

2 video out

3 ground

4 speaker (cold)

5 audio out/alarm out

6 12V DC

Taking if the pin out above is correct then i would guess i would tie the ground and video to the bnc connector and then ground and 12v DC to the power supply? Can anyone confirm this?

My Exxis camera looks like this:

Mace seems to carry a converter for this type of thing but its $24.94/each!!!

Thanks for any help on this problems of mine!

David