Jump to content

atxray

Members
 View Profile  See their activity

  • Content Count

    31

  • Joined

  • Last visited

Posts posted by atxray

  1. Posted

    You need to see if the DVR allows a connection with another stream.

     

    Example would be an "Extra Stream" or "Additional Stream". This would typically be used for Mobile phones and be in lower CIF resolution and lower bitrates like 64-256. If so then yes you will be able to stream from 1 DVR at that upload speed. As long as these are DVRs spread across locations with each having 384-512 upload then you should be fine. Its the D1 that kills that kind of bandwidth. You may still be able to stream 20-30 cameras from a single location with CIF encoding but it really depends on the DVR's network and encode options, and the ISP. In that case you could drop the bitrate down more also.

     

    What model of DVR is this?

     

    its H264 Pentaplex DVR X16D, xvision brand name

  2. Posted

    yes u are right, but to make it 1 MB is very expensive lol,,anyway.

    one more question please

    say that reduced the quality of the picture and the resolution, and upgrade the connection to be 512 Kbps, do u think it will be acceptable ??

     

    * my DVR is H264 16 Channels

     

     

    thanks alot

  3. Posted

    hello cctv_tech,

     

    regarding to my internet connection speed at office its 1.2 Mbpe for download speed and 110 kbps for upload, regarding to the sittings mmmm am not sure but i think its correct.

     

     

    thanx

    This is your problem.

     

    if its from the bandwidth its ok,,

    ok now am using 2 DVRs, each one 16 channels and i think ill add another one with 8 channels in the future,, in ur oppinion what is the minimum upload rate should i have to make the remote access view and playback acceptable.

     

    thanks alot

  4. Posted

    with 110 upload you are lucky if 2-4 cameras push through okay, and if you are trying more than that it will definitely cause problems. Especially if you are using D1.

     

    If the DVR has the choice of another stream like in CIF, then use that instead.

     

    its two DVRs, 16 Channels each one

  6. Posted

    hello everybody

     

    when i access the cctv in my office remotely at first it takes about 4 min to load ( either am using the browser or the CMS ), and second its very very VERY slow, am using ddns ( dyndns.com ) service to access the cctv remotely, do i need to upgrade my internet connection in office which is 1 MB, or i need to upgrade my dyndns account which will cost me 30$ monthly ?

     

    any suggestions please

     

    thanx in advance.

  10. Posted

    helloo all,,

    we are using PTZ dome cameras outside the company ( in the parking,, gates,,etc) but i found that these cameras is not suitable for outdoor use, its only for indoor,, so i want to change it all. am looking for cameras for outdoor use, cameras can work under more than 50° celsius degrees,,

    any suggestions please ?

     

     

    thank you in advance

  13. Posted

    helloo all,,

    am looking for good brand of IP cameras and not costly,, i need it for home use only,, i tried some websites but most of them didnt respond to me,, any suggestions ??

    and i want to ask how IP camera works,, like normal cameras?,, i.e. is it attached to normal DVR or its need specific DVR ?? and i saw that there is some cameras is wireless and some are not.. which is better ??

     

     

     

    this is the first time for me with IP cameras

    thank you

  15. Posted

    helloo all..

    i want to make my DVR send alerts email when motion detection..

    i think i did the right steps but its not working.. but am not sure !

    this is the steps i followed( in the attached file)

     

     

    Step one(pic 1-s1):

    At first I make this sittings for the mail setup in the DVR, the “admin” & “******” are my credentials for the DVR account. The receiver email is my yahoo email account.

     

     

    Step two (pic 2-s2):

    After that I forward the SMTP port “25” in my router to the DVR’s IP.

     

    Then, I enabled the motions detection option for some cameras, coz I don’t want the DVR to send me alerts for all cameras.

     

     

    , kindly let me know if there is somthing missing.

     

    thank you in advance

    s1.PNG.c9dc83692867e5606389f2780afad69f.PNG

    s2.PNG.a0452274701e3e1041041b74b14ea841.PNG

  19. Posted

    helloo

    its working with dyndns and the quality is very nice.

    but i have 2 observations :

    1- its too slow and take much time to show up. increasing the bandwidth solve this problem?

    2- i have 2 DVR , i configured the router DDNS settings for the one of them.. now if i want to access the other DVR, should i change the DDNS settings and configration again ??

     

     

    thank you soo much.

    Regards

  24. Posted

    helloo all..

    when i access my cctv(on my company) from home over internet using TeamViewer,, the quality is very bad and not good at all.. its like negative picture. i changed the settings for the Teamviewr, router, network and the DVR and the same result.

     

    my question is, if i make doman name for me on DynDNS.com and use to access my DVR,, would that make any difference??

     

    thank you

    Regrads.

  25. Posted

    hello all,,

     

    anyone know the best way to configure DVR with normal router in LAN. i dont have domain am using my ADSL and some remote connection softwares to access my computer and then the DVR.

    do i need domain to access my DVR (to give me good quality ) from outsde or not ??

    am using xvision products

     

     

    thanx alot.

×