Dindihi

Yep, that's what i have done now. But this is not a good solution.

Hi, i bought a Vivotek IP7142 camera, and set Day/Night mode to auto. I tried to change the Light sensor sensitivity from normal to low and high, but the camera changes all the time from day to night, and back: Sep 7 21:55:19 [iR Cut Control]: Day mode Sep 7 21:55:22 [iR Cut Control]: Night mode Sep 7 21:55:34 [iR Cut Control]: Day mode Sep 7 21:55:37 [iR Cut Control]: Night mode Sep 7 22:02:29 [iR Cut Control]: Day mode Sep 7 22:02:32 [iR Cut Control]: Night mode Sep 7 22:02:42 [iR Cut Control]: Day mode Sep 7 22:02:45 [iR Cut Control]: Night mode Sep 7 22:04:20 [iR Cut Control]: Day mode Sep 7 22:04:23 [iR Cut Control]: Night mode Sep 7 22:06:29 [iR Cut Control]: Day mode Sep 7 22:06:32 [iR Cut Control]: Night mode Sep 7 22:07:32 [iR Cut Control]: Day mode Sep 7 22:07:36 [iR Cut Control]: Night mode Sep 7 22:08:02 [iR Cut Control]: Day mode Sep 7 22:08:06 [iR Cut Control]: Night mode Sep 7 22:09:14 [iR Cut Control]: Night mode Sep 7 22:13:07 [iR Cut Control]: Day mode Sep 7 22:13:10 [iR Cut Control]: Night mode Sep 7 22:13:24 [iR Cut Control]: Day mode Sep 7 22:13:27 [iR Cut Control]: Night mode Sep 7 22:14:25 [iR Cut Control]: Day mode Sep 7 22:14:29 [iR Cut Control]: Night mode Sep 7 22:14:46 [iR Cut Control]: Day mode Sep 7 22:14:50 [iR Cut Control]: Night mode Sep 7 22:15:34 [iR Cut Control]: Day mode Sep 7 22:15:37 [iR Cut Control]: Night mode Sep 7 22:20:02 [iR Cut Control]: Day mode Sep 7 22:20:05 [iR Cut Control]: Night mode Sep 7 22:21:50 [iR Cut Control]: Day mode Sep 7 22:21:54 [iR Cut Control]: Night mode Sep 7 22:22:11 [iR Cut Control]: Day mode Sep 7 22:22:14 [iR Cut Control]: Night mode Sep 7 22:24:03 [iR Cut Control]: Day mode Sep 7 22:24:07 [iR Cut Control]: Night mode Sep 7 22:24:44 [iR Cut Control]: Day mode Sep 7 22:24:48 [iR Cut Control]: Night mode Sep 7 22:31:09 [iR Cut Control]: Day mode Sep 7 22:31:12 [iR Cut Control]: Night mode Sep 7 22:32:38 [iR Cut Control]: Day mode Sep 7 22:32:42 [iR Cut Control]: Night mode What can i do ?

Thanks for the link! Another fine software is "motion" for Linux and Zoneminder. But i can't run the software you mentioned, as i only have a small linux server (Via C7 processor) without a GUI. Same for zoneminder, you need a big processor. PS: The D-link and trendnet camera's are already sold

Hello, I’m searching for a good, not too expensive outdoor security camera. I already had the Trendnet TV-IP522P And the D-Link DCS-7110 The Trendnet has a poor Video Quality. The D-Link Software is a disaster! (as for nearly every Dlink device I tested) Movement detection is nearly impossible. Either no movement is detected at all, or all the time false positive detections. (And the real movement, when i walk in front of the cam is not detected) Answer from the D-Link Support: „Because you are experiencing the same lack of results with two units it can not be faulty cameras. Therefore, I must recommend you to look on areal external motion detector to achieve good enough results.“ SNMP Daemon on the camera dies after the first connection. Etc...... So what i need is an OUTDOOR Net camera (no wireless needed), with the possibility to monitor in complete darkness (so with IR lights). POE is an advantage, but not necessary. Reliable movement detection. Send pictures to email. Save movie to Nas. What do you think about the following device: Intellinet NBC-30 IR Other suggestions? THANKS!