keat63

Guys.

Any thoughts.

If I view my DVR via Eagleeyes Iphone App, I can see live view and I can playback action alerts. I can go back days, and still play back.

However, through PC Web Browser and PC VideoViewer app, I can only do live view.

Web Browser shows alerts, but i get an error "Unable to playbcak Channel"

In Video Viewer, I see no events at all.

I'm guessing it's down to firewall ports ??

I found the same issue, so signed up for free with no-ip.org instead.

Maybe this will work for you.

If you can find an FCC Id on the main PCB, there are web sites available where they tell you the manufacturer of the FCC Id

http://transition.fcc.gov/oet/ea/fccid/

I had something similar on my KPD674. I changed the port from 80 to a random number (5555) and it worked.

Is anything common to all devices.

Maybe it's a firewall thing ??

If all else fails, I guess you could try removing the battery for an hour.

(if its's anything like a PC then a few minutes would probably do)

Guys

I think I may have it working.

Instead of using port80, I'm using port 5555 and it seems to be resolved.

well at least over 3g, so I'll check again tomorrow when on the work wifi.

I don't mind admitting that I'm stumped.

Live view, List view and playback all work OK, on my Iphone when I'm inside my own router.

But only Live View and List View work when I'm outside.

If I attempt to play back and recorded video, it fails.

Are there any ports that I may need to open on the router ?

I don't suppose there's a way to reboot it remotely ?

OK. It seems that playback is failing on Web Browser as well as Video Viewer. I'll have to wait until get home.

Thanks for the info.

Today, I'm trying to access it remotely via Iphone using EagleEyes.

If I bring up the activity list, and try to play back an activity i get an error message "No Record Data".

I'm assuming that this may be a network timeout rather than no data, as it's been working faultlessly while on my home network.

It's the same whether 3g or Wifi.

Incidentally, live playback is fine.

Any thoughts ?

Thanks in advance.

Guys.

I've just this week replaced my PC/Server solution, with an Avtech KPD674, which I'm quite happy with.

It appears to be functioning correctly, and I can access it remotely.

However, Iphone push notifications would be good.

From what I can make out, this may be possible on later firmware revisions ??

I'm currently on 1012-1003-1007-1002.

Which is the most upto date FW revision, and would it give me the push notifications.

Are there any benefits to updating ?

Regards

Keat