manky

thanks rory. i tried all that you said and still stuck. dont know whats the problem. i tried with ur dahsoft viewer. that also didnt me anything better. the windows loaded much faster than the older situation. that was the only change. the windows loads an image and then again goes stuck.. there is also no loss in the network..

Hello everyone, i bought a dahua dvr for one of my work sites. when i checked it at my office, it was fine. i could view the video, login the dvr, change the settings and all. but when i connected it at the new work site, and tried to access it from our old office, problem started. the problem is this. i am able to login and change settings. but, when we select video to the window for viewing, it plays for a short time only. i.e for about 20 - 25 seconds. after that, video freezes. we thought its a network problem and brought down the fps, bitrate and video quality and restarted the dvr and pc. still, the same problem. the network is a wan. the dvr is dahua DVR1604HF-S - 16 channel. the pc we connected is a win7, core 2 duo, 4 gb. tcp - 37777 udp - 37778 http port - 80 rtsp port(i dont know what that is)- 554 max connection-20. (these are all settings on the dvr) the software is pssV4.05 i would also like to know what the transfer mode implies. theres 3 options. latency, fluency and self adaptive. it would be a great help if anybody knows how to deal with this issue. thank you.

keat63, i disposed off that dvr. and bought a new dvr. this one is dahua. its gives a good feed when connected in a lan. but still there are problems remaining. i am posting it in the forum. please help if possible. thanks for the reply. and sorry that i couldnt reply sooner.

thanks for the reply keat63. But it still didnt work.. Dont know what the problem is. Still unable to connect to the dvr.

Hello everybody. I recently bought a dvr (dante ver: dlw 5916wal). but i am having problem connecting it with the software. the software they have provided is pss v4.05. i have connected my laptop and dvr via lan. not internet. i have set the ip address, given the gateway and all. when i ping it, it shows a positive result also. but when i run the software, it shows logn failed. (time out). theres an admin account inside the dvr whose login details i have given in the software. but still the problem persists. i am unable to access the dvr using the software from my laptop. what did i miss? what mght be causing the problem? If someone can identify the problem, please help me out.. one thing i forgot. when i asked a friend he asked me to run a command in cmd. nbtstat -a followed by ip. it gave host not found as reply. i dont know what it means. thought it might be of some help.