cctvmann

the best way of cctv over the internet is get a static ip attached by your provider explain its for the cctv use on your premises and they should be able to alocate you a static ip address

would your internet supplier be able to change to static ip address

ive always liked the dm stufff but found it a right pain the software was on the hdd not the memory of the dvr, ive started moving to hik vision now because of the hasslle of the software on the dvr hdd where hikvision has the embedded software on the pcb chip and it has more useability

its probably setup from factory as pelco d 2400 address 1 try that as the setting in joystick and see how that goes.

is this any good http://www.ebay.co.uk/itm/like/111722615308?lpid=122&chn=ps&googleloc=9045491&poi=&campaignid=207297426&device=c&adgroupid=13585920426&rlsatarget=pla-142405615986&adtype=pla&crdt=0

hi there can you pm me details of your install requirements, dont just go with a pre boxed kit because the cameras will be cheaper general standard units, if you tell me by pm what you require to see i can give you some guidance on which cameras would be better suited.

try changing the cameras and see if that sorts the problem out otherwise it could be a cable fault.

which model camera is it

your voltage is too low possibly because the resistance on cable run for dc power is too long or cable to small therefore resistance is dropping voltage once the additinsl night ir lights power pulls more current, can you mount the psu nearer the camera and feed from there.

can you upload a couple of pictures to this forum asi cant view the coded link you supplied thanks

Does anyone know of floureon DVrs and how they are in the app use

http://www.cctvcentersl.es/upload/Manuales/RX210__(TRX228)_

http://www.cctvcentersl.es/upload/Manuales/RX210__(TRX228)_manual_eng.pdf ive found this if its any help

I gather this dvr must be to do with cakes as I get the impression the unit is scrambled

Any body able to advise on this brand of dvr

Sorry but I'm not on Facebook at all I don't use it

whats the general view of floureon dvrs as ive not installed one myself but a customer has purchased one for his cctv cameras as thats what he wanted and i just wondered what people thought of them as a dvr?

on dvr unit use mouse go into main menu and go into network setup the ip address of unit will be your local ip for dvr and mobile port will be further down that screen above http port i think

hope this helps

that is correct the dm ds2 must have booted fully to recognise the keyboard, if its halted then it will not recognise the dvr keyboard at all.

you need to press unit number on keyboard and the unit number that the dm is programmed to ie if the ds2a is unit 3 then press unit and number 3 on keyboard etc.

Try pulling camera away from Wall a bit To stop the ir bounding back that may help throw more ir light onto the path your viewing

look like a covert ca,era viwing a road network of some sort

Have you got a video file that you can email

You have a pm