smmcconn

Just a hobiest here playing around with cameras in the house. But I thought I could split the Signal (2nd leg to feed modulator) after the camera and feed the IP server and send it to my server for recording. Or watch it from the web. Anyone seen or played with one of these? link: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=9744453686&ssPageName=MERC_VI_RSCC_Pr4_PcY_BIN_Stores_IT Thanks! Shawn

I'd hate to say this but after all that you go me thinking about that 4 port RCA to IP server for 100 bucks again! But I would still need to split it to send to the encoder! Heck I Have a gigabit backbone in the house, and I just put in a computer next to the TV with Windows Media Center on it! Good to know about the rj45!! Thanks Jisaac! Shawn

Thanks for the Eye Opener!! ahhhh the magic words "remote viewing from the dvr instead" I didn't know!!! When I see these cards I only see BNC inputs!! Tell me more about it, what is the output can I pump into my Modulator so I only have to switch channels on the TV (this is what I'm aiming for)? All New questions if I can get it into my Modulator 1. DVR card and FPS?(cheap but good) Note: My Server = AMD XP 3200 (2.2 GHZ) and 512 MB of Ram 2. Software? 3. I heard I can run everything over Cat5/Cat6 even power? Thanks! Shawn

Thanks for the Good Info Rory! I have one question though are you spliting right before the DVR card? Oh and as for the modulated signal not looking good, I'm using the following and it looks great!! (however I haven't split the signal yet for the pc/IP signal or maybe to the DVR card) 1. Channel Plus Notch filter Model# NF-469 2. Channel Plus Model 5435, 3 Channel AV Modulator 3. Channel Plus 2512 DC and IR Passing Splitter / Combiners 4. Channel Vision C-0332 1 In / 16 Out Amplified RF Splitter 5. X10 B&W Low light with ninja (for playing with) thanks! Shawn

We want to be able to turn the tv station in any room and see baby!

Just looking for a little direction for my home. 1. (Just Looking for the best of both worlds! Ip/recording and looking at it on my TV in any room in the house) Can I split the signal right after the camera and send one to my 3 Channel AV Modulator that pumps into my catv circuit and pump the other one into a 4 port IP network video server for CCTV then send it to my home server? 2. For the Babies Room, I had bought a 1/3 sony 12 IR 30' Color/BW but the Leds would glow red! OMG poor kid will be scared to death! Not all do this right? Oh and it would be too bright when the lights where off! I got this one on ebay, but I am not happy, any recomendations. (looking for one under $100) Please and Thanks! Shawn