chiewfai1587

Hi Lydia,

Does you have tried filezilla server to accept FTP upload by the DVR?

Regards,

Fai

hello,

This have to contact the installer or the DVR distributer. Please check the model of the DVR and google it, it should and try contact the distributer. Perhaps you can find the solution of reset it so able to playback.

Regards,

L

Hello Hartawan,

That means the video output from the DVR was low, could u contact your supplier of the balun, change the balun more higher spec.

somehow on some product

passive to passive was 400m colour

passive to active was 700m colour.

Sir can try looking active 1 to change it and try.

Regards,

L

Sorry, for very late response.

It somehow have port conflict on the port 443, please change the port 443 to other port number.

Hi Sir,

samsung SCZ it hv support multi protocol which including protocol pelco D and pelco P. Therefore, does ur DVR hv support 1 of the protocol will do.

Set the baudrate, protocol and id. it will connected.

Regards,

L

Hi,

Fine, could you let me know the full situation.

Does your web browser can access from outside network via WAN and hostname?

Your Hik Vision IVMS4200 does is the latest version?

Your DVR model number and firmware is the latest version?

Regards,

Fai

The old version of ICMS, it able can playback direct from the HDD(which unpluged from the DVR), please ask me via my email address.

Regards

Thank for info..

Hi Sir,

Do you have try the software iCMS(window) for playback the HDD directly. While directly Hdd to pc(window). Pm or email me, when you need the software.

Regards,

Sir,

Aren't first time on installing balon? However, when sir take out the skin of the wire. please dun use cutter suc as scissor or wire cutter. Please use ur nails to tear it out. It because when using cutter easily form the source to break the wire.

(cause lastime i hv this experience regarding tis)

Regards

Hello Sir,

Could you check your port forwarding. by using "canyouseeme" website. Does all the port is successful port forwarded?

Hi,

This is DVR's firmware problem. I agree with you change your DVR, there are no other ways, due the firmware of the DVR is outdated.

Regards,

Fai

Besides,

Please let me know, sir using local View via IE web Browser by using IP address http://192.168.1.51:81 (static IP), can access to DVR or not. I not understand what situation you are.

If can access, that means is the DVR firmware problem. I have solve this type of DVR but different front panel only.

Regards,

Fai

How your local view? means due the ip? is working?

Hi,

Please use Internet Explorer with turn on View Compatibility.. U have to forward 4 port

81 web

5050 command

6050 media

7050 mobile

Please dun use google chrome. This DVR unsupport google chrome. Please use Internet Explorer. If still unable view from WAN IP(remote viewing) please contact the distributer of the DVR for upgrade this Unit DVR firmware.

However, I wanna know how to calulate the bandwidth for the each camera run thought network to my NVR. I don't want to exceed the limitation of NVR. How to calculate? 1.3megapixel it run how many mbit/s ?

Hi everyone,

Recently i have bought a unit Avtech AVH306 with 6 unit IP camera avtech brand AVM357.Does really need use gigabit switch for system?

It because i wanna view all network camera under 1.3 megapixel but recording 3unit 1.3megapixel and 3unit VGA. Does this possible?

I found the view throught internet(remote view-view from outer network) its make blur. Does this have any solution?

Regards,

Fai