Jump to content


  • Content Count

  • Joined

  • Last visited

Everything posted by reddal

  1. Hi, I've got an analog CCTV system with 14 cameras attached to a Samsung SRD-1670 DVR. I've also now got a few IP cameras I've added. Both of these work fine on their own - but is there a way I can view both in a single viewing system? i.e. maybe software that can access the video supplied by the DVR - as well as IP cameras? I guess the alternative would be to convert all the analog video to IP with some converter - but it would be a shame to have to get rid of the DVR - which was expensive and works fine - its just integrating viewing that I want. Thanks for any advice. - reddal
  2. Hi, Sorry to resurrect this after so long - but I finally got this to work and thought it might be useful to someone else. To get BlueIris to access each of the analog cameras attached to a Samsung SRD-1670 DVR then trick is to : - use the generic RTSP profile in BlueIris - use 558 as the RTSP port (at least this is what mine was using) - use eg /5 (for cam 5) in the path - use the correct admin username and passwork for the DVR in the BlueIris credentials The 558 port was not at all obvious! Once I did that it works great - I have all my IP cams and all my analog cams in BlueIris all working together with a single interface. Hope that helps someone in the same situation. - reddal
  3. Thanks - I got BlueIris - and it works well for the IP cameras. I haven't yet managed to get it to receive the video streams from the Samsung SRD-1670 DVR though. I suspect its possible - but probably needs some magic syntax for the rstp url. Anyone know what that is? thanks - reddal
  4. Sure - the part number is Z5900136501A. The actual remotes are labeled AB59-00033A (as was the original remote that came with the system). However you need to order Z5900136501A to get these. Email parts@aoneservice.co.uk . They were £5 each including delivery. regards - Reddal
  5. Hi, A few months ago I bought a new DVR (Samsung SRD-1670DC) which I'm pretty happy with. The only trouble is that the remote control that came with the unit didn't work. Therefore I sent back the remote to the dealer expecting to get a replacement. That was months ago - and I'm getting nowhere with them. I've looked around the internet trying to find where I can buy a replacement remote. Since I sent back the original remote I'm not even completely sure what model the remote should be - but it might be Z5900136501A. I don't seem to be able to find anyone on the internet that will sell me one! Does anyone know : - where I could get a replacement remote from? - failing that - what is the exact model number for the correct remote for this DVR? - failing that - has anyone programmed the IR codes into a universal remote (I can't find any)? Any help would be very gratefully received. thanks - Reddal
  6. Hi, So I emailed about 20 internet retailers and ebay sellers and they all confirmed they didn't have any of these remotes and didn't think they could get hold of any. I tried calling Samsung Techwin in the UK - and they told me they couldn't help - I would have to go via a dealer and I couldn't buy from their spare parts people directly. However they mentioned in passing the name of their spare parts distributor - 'A-One'. I looked up 'A-One' and contacted them anyway at parts@aoneservice.co.uk . It turned out they had stock and were happy to sell to me - for only £5 each remote including delivery (which I was very happy with given I was desperate and would have paid a lot more). I ordered 4 of them and they arrived today - working fine. So it all worked out in the end - but I've no idea why it had to be so hard! - Reddal
  7. reddal

    SVR-1670 SVM-S1

    Also try : username : admin password : 4321 - Reddal
  8. Hi, Sorry - should have said - I'm in the UK. I did see that ebay listing - but its finished and there doesn't seem to be a relisting. I've asked the seller if they have any more and if they can ship to the UK. thanks - Reddal
  9. reddal

    SVR-1670 SVM-S1

    Hi, I think the default admin login is probably one of : username : admin password : 1234 or username : Admin password : 11111111 If that doesn't work then I guess you have to reset to factory settings. There is probably a way to do that without an admin password - but I don't know it. - Reddal
  10. reddal

    Samsung SRD-1652d

    Hi, I've got a SRD-1670DC - which I think is a similar, but slightly older model. As a pure DVR it works pretty well. I mostly use it with the HDMI output. There are a few others ways you can access it : 1) Via the samsung smartviewer software on a PC over a network. This software is a bit clunky at times but its the best I've found. Some features only work with certain firmware versions (e.g. the search features stopped working when I upgraded to the latest firmware). It looks like you could connect to several DVRs and create a combined display with up to 36 cameras (though I've never tried that in anger). 2) Via the samsung smartviewer iphone software. Doesn't seem to work - I've tried everything. 3) Via samsung NET-iviewer software. I got this to work on a PC - but it didn't seem to have any advantages over smartviewer. 4) Via samsung i-polis iphone software. Doesn't seem to work. 5) Via new samsung SSM software. God knows if this helps. I haven't tried it and am not sure how you even get it. 6) Via the built in web server. Is quite difficult to get working properly - and a bit clunky when it does. 7) Probably others.... So the client software support is a little incoherent to be honest. It would be much better if all the effort was concentrated into one piece of software - but instead there are many - none of which are perfect. Hope some of that is helpful. regards - Reddal