Jump to content

amberwood

Members
 View Profile  See their activity

  • Content Count

    2

  • Joined

  • Last visited

Posts posted by amberwood

  1. Posted

    Hi guys

    I am looking at a CCTV mobile unit which has an Indigovision system running 2 x MIC 400 (they may even be 300's) cameras from a server and 2 x workstations. The computers have all been scrapped and I'm trying to just get the cameras up and running on a simple camera/keyboard basis. First, I have tried using the Indigovision keyboard. The telemetry connection at that end is an RJ11 connector marked RS232 and I have hard wired the other end into the MIC control unit using the A and B rx terminals. Protocol is Pelco P, baudrate 9600. And I get no response. 

    I then tried another keyboard which has an RS484 output but still no camera control. 

    I even tried connecting the MIC control telemetry to a RS484 output from a DVR but still no joy.

    I'm clearly missing something obvious here - it should be so easy. Any suggestions?

    IMG_E2789.JPG

    IMG_E2795.JPG

  2. Posted

    Hi guys

    I am looking at a CCTV mobile unit which has an Indigovision system running 2 x MIC 400 (they may even be 300's) cameras from a server and 2 x workstations. The computers have all been scrapped and I'm trying to just get the cameras up and running on a simple camera/keyboard basis. First, I have tried using the Indigovision keyboard. The telemetry connection at that end is an RJ11 connector marked RS232 and I have hard wired the other end into the MIC control unit using the A and B rx terminals. Protocol is Pelco P, baudrate 9600. And I get no response. 

    I then tried another keyboard which has an RS484 output but still no camera control. 

    I even tried connecting the MIC control telemetry to a RS484 output from a DVR but still no joy.

    I'm clearly missing something obvious here - it should be so easy. Any suggestions?

     

    IMG_E2789.JPG

    IMG_E2795.JPG

×