JeroenVtec

Hi rainman could you check the setup for me that will help a lot Jeroen

Hi friend, I already reply you via email. Pls check that! Have a wonderful day! Hi China_jerry Could you sent that informations also to me ? I have the same cam and problem. I test at the moment with axix video server but I have also that keyboard controller upstrairs. thank you !! Jeroen ps my d5 led won't blink only on reboot/reset when I change switch 8

And here another one ! I have searched the web and collected a few pdf's, I have the same ptz cam. I would like to control it by pelco d, or to start move on commando. I tried many dipswitch settings with and without termination. I ahve a pelco -d/p dome controller and a axix 241s video server, I loaded peldo driver and the vlc. I booted the cam serveral times with the rs485 connected. I many manuels the dip switches names are revered so on my cam just like the one here they talk about dilsw1 with 4 settings but on mine it's dilsw2. in the small document so posted on the last page they talk about the correct dilsw2 not is use. The wiring seems to be ok btw a diffrent type VCL does run on the axis with the vcl driver Are they people who get it working. My pictures and colelcted info: http://vanelmpt.nl/collected_info.zip what is the lk17 jumper ? thanks in advance !! Jeroen edit: some more info and questions

never mind dvr is working again and sold, also find the right software. Case closed

Hi All I have a honeywell ahdr16 2 x 80gb where the boot disk is a bit corrupted. It gives a bad disk status and in the menu you get often setup not found. I cloned the disk to a better disk but the error stays. I am unable to find firmware 2.4.0 to try to recover it can someone help to to provide it or to recover the disk ? It has to 30 mb readable linux partitions and a 2.2gb unknown partiotion and also a 80gb unknown partition. undelete does not help. and what is the right ras software (version) for this dvr? Thanks in advance Jeroen edit: upload image