arkansas-bigfoot

I purchase about 10 dome cameras at a Wal-Mart auction. Half of them don't have the cables to attach the power and BNC camera cable to the motherboard. Where can I purchase these connecting cables or just the female ends which attach the cables to the motherboard? It has on the back 12V/24V VNH2J1VF496C1906

Did you find a source for the 3-4 pin mini connectors? I purchased about 100 cameras at an auction but they don't have the power and cable connecting cables. I used the cables from one from a dome camera and the cameras work just don't have the connecting adapters to the circuit board.On the back it has 12V?24VNH2J1VF496C1906.

Got a harddrive and software and using a Defender Camera, it works and records. I went to a Wal-Mart/Sams auction and got about 40 cameras Sony-Samsung. Now I am wanting to connect a few cameras for my house. Some are dome and some are outside bullet. I connected two of them and they have good quality about 300-400. What do you recommend? 1. Cat5, Cat5E, Cat6 or RG59 a. Connectors, tools 2. Power supply for about 6 cameras 3. How do you erase the Harddrive? 4. The DV8116 has audio connectors, How do I use that and what do you recommend for speaker? would this run on the Cat wires 5.I will look to see the Version of Pelco. I think it's 2.0

Its a DX8116-500

I am 70 years old and just purchased a Pelco DX816-500 at a University auction. I hooked it up to the putter and discovered I needed software and a harddrive. I have those on the way.I know very little about installation but can install harddrive in PC. Now I am going to need cameras. Probable 3 outside and a couple inside. They don't need to move, just stationary. Would like them to be motion sensitive and infered type for night vision and recording. My house caught on fire Christmas and they are doing the repairs. Some strangers now have keys to my house for cleanup and repairs and would like to monitor things when I go to see my Grandkids for the weekend. What would you all suggest for cameras? and installation locations etc.

I am 70 years old and just purchased a Pelco DX816-500 at a University auction. I hooked it up to the putter and discovered I needed software and a harddrive. I have those on the way. Now I am going to need cameras. Probable 3 outside and a couple inside. They don't need to move, just stationary. Would like them to be motion sensitive and infered type for night vision and recording. My house caught on fire Christmas and they are doing the repairs. Some strangers now have keys to my house for cleanup and repairs and would like to monitor things when I go to see my Grandkids for the weekend. What would you all suggest for cameras? and installation locations etc.