Outsync

Funny those pigs! They must've been stressed out! Pigs are actually quite smart and social creatures. I see you also caught the police parking in your no parking zone!

And here is the night footage, ain't all that great but it will do. Anything I could do to improve it? http://www.youtube.com/watch?v=UV7UDDeIfDM&

Here is a Youtube clip featuring some footage from my recently acquired ACTI D32, It's mounted outside to monitor a car that is parked there normally. I quite like the day time quality this camera produces but not extremely happy about the nighttime quality. It used to be mounted at another place where I had complete darkness during the night so the only light it had came from the solid light led. Where it is mounted now there are about 3 yellow street lights so it should increase the quality (I hope!) setting the shutter at 1/15 seemed the best option for me during nighttime with an FPS at 15, during day time I keep it running at 30. I will post a nighttime image soon. Don't forget to set the quality at full HD in youtube. http://www.youtube.com/watch?v=ZE4miSWI_ME

Any update on this? I would be interested to see if the IR is really that bad..

All are 1.3 MP on 2M stream h.264 encoding.

Hi Guys, I've been test running Blue Iris for a few days now and just added a 3rd ipcamera. The third camera is an AVTECH 375 outdoor camera connected over poe. I notice that the third camera seems to lag and lose its connection more then it really should. At first I thought the camera may malfunction or has some stability issues but I'm ruling this out because I've owned another ip camera a Y Cam Cube HD which had the same stability issues. This resulted in a few minutes of a good stabile video stream and all of the sudden the image would freeze and it would reconnect. Because I was not overall satisfied with this cam I sent it back and did not pay further attention to it. But now I do wanna keep this AVTECH camera and this instability is giving me some headaches. I'm sure it has nothing to do with Blue Iris and I'm starting to look at my network. Each of my cameras gets a fixed IP adress assigned by the router and the camera's MAC address this goes without any issues. So because this camera also suffers these issues I'm led to believe it is my router an Apple airport extreme basestation that is causing these issues. Could it be possible that it simply can not handle the traffic 3 ip cameras some phones and tablets and a laptop cause? We only do some web surfing and an occasional video on youtube every now and then to other then the 3 ip cams they don't generate alot of local traffic on the router. It doesn't make a difference viewing the cams through LAN or WAN, and it's always the third camera that I add that gives a problem (I've tried friends camera and yes indeed the same instability showed!) Now I'm really puzzled honestly why only the third camera that I add that causes this problem and not the two others already connected? Is it really a router problem? I do hear a zoom/ticking coming out of the router which wasn't there before. So my network setup for the cameras is as follows: Airport extreme basestation latest model and latest firmware around 3 years old A Foscam 9821w wired latest firmware never had any issue A Foscam 9802w wireless latest firmware no issues An Avtech 375 poe wired drops connection alot! No other wired connections to the router and all other tablets/computers/phones are connected wirelessly. A reboot or reset doesn't help. Any thoughts, do I buy a router that is not Apple anymore and go for another brand's high end model? Thx Gill

By the way, dome or bullet or ... is not important aslong as I can easily connect the ethernet cable.

Hi Guys, I'm planning a second outdoor camera, I will connect this one using POE, in addition to my Foscam 9802w. I already narrowed down my search to these two cameras (ACTI D31(2) or Dericam H602W) because they're HD and support POE. Now I'm having thoughts on the Dericam because well.. it's Dericam and I had my fair share of instability issues with the 9802w. From the things and reviews I've read is that the Dericam could be potentially unstable. Where I will mount this camera I require a ladder to access it so the cam I buy needs to be rock stable! As it will be mounted around 5 meters from the ground the viewing angle should cover as much of the space as possible. The Acti has a 4.2 lens and the dericam 4.0. Will it make alot of difference? Both camera's are very similar but the Dericam has WDR. What I require is a good nightvision because there is no lighting other then the moon. I will add this camera to my blue iris laptop server to record motion events. If it's possible viewing on OS X would be welcome too because that is my main laptop. Should there be other (better) alternatives I'm willing to pay a little more but no more then €300,00. Mind you I have to order cameras within the EU because I live in Belgium. There is a Dahua dealer in Holland but these cams seem more expensive should I want similar to these cams. Thanks for your advice!