Jump to content

louis2311

Members
 View Profile  See their activity

  • Content Count

    3

  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. louis2311
    I just set one up yesterday. You need to login to it and change the IP address to 10.1.1.xxx and the gateway to 10.1.1.1 To login to it I think it's set to 192.0.0.64 so power it up with a poe injector or 12v power supply and plug it into a switch. In your web browser type http://192.0.0.64 user is admin and password 12345 More than likely you're not on a 192.0.0.xx so you will need to setup ip4 in network settings to set a static IP address. So set it up be an IP address of 192.0.0.xx sub net 255.255.255.0 and gatway 192.0.0.1 In the nvr do a manual add with the ip you set it up to onvif admin and 12345 YOU can also try in the nvr settings go to network and change the switch settings to 192.0.0.1
  2. louis2311
    I have a Dahua nvr5216 and I'm trying to intergrate a Clearpix DM180pan-2k-h (Same as Avigilon jpeg2000 HD Pano dome 180 I think) with it. Does anyone here know if it will work with it? A friend said it would work, but couldn't remember what port to use. I tried the ports that the Avigilon software says it is.
  3. louis2311
    I have a Dahua nvr5216 and I'm trying to intergrate a Clearpix DM180pan-2k-h (Same as Avigilon 8MP jpeg2000 HD 180 Pano Dome I think) with it. Does anyone here know if it will work with it? A friend said it would work, but couldn't remember what port to use. I tried the ports that the Avigilon software says it is.
×