Jump to content

celnut

Members
  • Content Count

    7
  • Joined

  • Last visited

Community Reputation

0 Neutral
  1. celnut

    PTZ help

    Ok, so I go into the camera menu and go down to 'Dome' - main menu -------------------------- System - Dome Camera Language Display Reset Exit then down to 'I R Display' - main menu -------------------------- Comm - I R Display Guard Tours A = B Scan Pan Scan Park Action Privacy Zone Advanced Exit now I've got 'Working Mode' - main menu -------------------------- - Working Mode Auto Testing Time 08S Output Power 100 Illumination 02 Ambient Light 50 I R Switch Zoom 07 Exit enter edit mode and the curser changes to a '>', now I have 3 choices main menu -------------------------- > Working Mode Auto Testing Time 08S Output Power 100 Illumination 02 Ambient Light 50 I R Switch Zoom 07 Exit it's dark and I choose 'Off' and the camera indeed changes to colour (no IR) - main menu -------------------------- > Working Mode Off Testing Time 08S Output Power 100 Illumination 02 Ambient Light 50 I R Switch Zoom 07 Exit I go down to 'Exit' and come out of the OSD - main menu -------------------------- Working Mode Auto Testing Time 08S Output Power 100 Illumination 02 Ambient Light 50 I R Switch Zoom 07 - Exit the camera remains in day (colour) mode until I start a tour or move the camera, then if I go into the OSD menu again, I see the Working Mode has reverted back to 'Auto'
  2. celnut

    PTZ help

    I'll post some pictures of the menus if the moderators allow it, and show what I've tried
  3. celnut

    PTZ help

    Hi. When you exit the PTZ menu .........did you just exit or did you go down the menu to save/exit hi, there is no option to save from the menu
  4. celnut

    PTZ help

    Hi, I bought a PTZ dome from china, it states that it is a Sony 9600-1. I don't need the camera to switch to night mode as there is plenty of light and the IR triggers the other cameras when it is on guard tour, so I switched it to day mode by calling preset 83, but when I start the tour or A-B scan it switches back to night mode. Any ideas?
  5. Hi, I have a Swann DVR8-4000 system with a PTZ camera, I have set up the presets and a patrol, it works ok, according to the manual I should be able to set up additional patrols but cannot find how to do this, can anyone help?
  6. celnut

    PTZ and swann dvr

    I sorted it the patrol problem was because I did not enter all the different presets separately, thats ok now. the second problem was that the camera would reboot when trying to set the presets. I found this to be the voltage drop as the camera tried to pan and re focus on pressing set. the extension lead was quite long so I shortened it and now the camera is accepting the presets. hope this is of some help to anyone with similar problems
  7. hi I bought a couple of CAM-PTZ-902-SSG cameras from Abancctv and hooked them up to my Swann DVR8-4000, they both work with the pan tilt and zoom etc. however, one of them I can set the presets up ok but the other does not seem to accept the presets. also the one that I have managed to set the presets up on, will not set up a patrol setting. any ideas anyone?
×