SRTCCTV

Hi everyone, Installed a new Hikvision DS-7216HGHI-SH/S. My customer has one of those Comcast systems where residents can view all cameras through an specific channel in the homes. But they can also see one particular camera on another channel. Dvr is Hdmi and vga output only. I know that I can go HDMI to rca video and that would give access to all cameras. But they also want to see that another camera only on another channel. (Camera 11)

Hi Everyone, I have a Hikvision HD dvr installed at home. I can connect to it via mobile network and on outside wifi. When I try to connect via my home wifi I can't connect to the phone app. Also I can't connect via my ip domain at home but I can from an outside computer. Basically I can connect as long as its not on my network. Need help thanks Ports 443, 80, 8000, 554 (open)

Thank you..

Hey Everyone, Looking to get some LPR Cameras for a client. Cameras will be placed on a security gatehouse at entrance of residential community. Entrance has 2 lanes. (Visitor and Resident) Do I need 2 cameras for the License plate capture or just one?( Entry lanes are right next to each other) And what cameras do you recommend? This is for a HD-TVI system

Hey Everyone, Looking to get some LPR Cameras for a client. Cameras will be placed on a security gatehouse at entrance of residential community. Entrance has 2 lanes. (Visitor and Resident) Do I need 2 cameras for the License plate capture or just one?( Entry lanes are right next to each other) And what cameras do you recommend? This is for a HD-TVI system.

Is that a factor

Hi, If you forgot the password you can remove the small rould battery on the board. Make sure you disconnect from power and then remove the battery from the board for about a minute. Put the battery back in and plug back in too power. DVR should have reset. Hope this helps.

Hikvision DS-7216HGHI

Hey Everyone, Im doing a residential community install. I installed a total of 7 HD 1080 cameras. 3 of those cameras are within 100 ft of the power supply and they are working great. 2 others are at 823 ft and the other 2 are 523 ft away from the power supply. Im getting a 6.94 Volts at the cameras. Do you think if I upgrade the power supply to a 24 enough voltage would reach the cameras. Really trying to avoid adding 2 additional power supplies as the cameras are in opposite direction.

I thought about that before installing but figured it would be ok. Cameras are HD-TVI. GIVING it a try in just a few. I will post results. Thanks

Does anyone know where I can pickup some HD-TVI box cameras? My suppliers down in Miami, FL are all out.

Checked but all they have are box cameras that are sdi.

Hi Everyone.. I have finally opened my business and was wondering if you guys can give me some ideas on how to properly quote my jobs. Don't want to over bill and definitely don't want to go in too cheap. Thanks

Numb-Nuts sorry about the late response. Just saw this. Im in Miami Florida. I do alot of business with homeowner associations and retail stores. I own a security guard company and wanted to incorporate the CCTV and access control. Ive been installing for about a year now. I took some certification courses and picked up a lot from an installer I use to contract work too. Ive given a few estimates and I notice that I come in way cheaper then my competitors.

Hey Everyone, I really need some help determining how to give correct estimates/quotes for labor and materials etc etc. I always seem to be way under my competitors. Please advise how you guys quote jobs. Thanks

Can B connectors be used with Cat5 to create a patch cable from power supply to DVR?

Can B connectors be used with Cat5 to create a patch cable from power supply to DVR?

Hi everyone Im a newbie. When wiring using CAT5 how do you wire to power supply and DVR if DVR is located a few feet from the power supply. Do you have to run a separate cable for power ? Hope you understand my question. Thanks

That is correct. Do you recommend another method of wiring using CAT5? Just want to make sure the job looks clean and to par.

That is correct. Do you recommend another method of wiring using CAT5? Just want to make sure the job looks clean and to par.