Jump to content

narinesa

Members
 View Profile  See their activity

  • Content Count

    83

  • Joined

  • Last visited

Posts posted by narinesa

  1. Posted

    I have Dahua and Hikvision NVR.

    Both are on the same network and configured the same and working with gmail.

    Last week, Hikvision stopped sending email and cannot figure out why.

     

    If it relates, the same time paperport scanner software will not start indicating that there is no default email client. But I do have outlook as the default.

    Paperport is x86 and outlook is x64.

  2. Posted

    I am using Hikvision nvr and smart ptz.

     

    Motion detection is set for 0000 - 2400

    It is being triggered day and night but I am getting only dat time pictures.

     

    No motion detection pictures night time.

     

     

    I am not emailing it and the buzzer is turned off. Just want to capture day and night pictures.

     

    Recording is set for 24 hours.

  3. Posted

    Hikvision digital ptz takes 3 pictures for each motion detected.

     

    1. Can I change this count to 1 or 2

    2. Can I change the timing between each picture

     

    Current timing between pictures maybe 3 seconds. Would 1 second or shorter

    I am using it in the LPR mode with motion detect.

    Not sure the proper use or setup for LPR but playing with it.

  9. Posted

    Just setting up this Hikvision NVR 7616 with several cameras.

    One is a Dahua PTZ

    I can get the networking email test ok but not the motion detection

    I am pretty sure that I did set it up properly according to the manual

    Perhaps some other switch is missing or perhaps that I also have a Dahua NVR on the same network

    But Dahua NVR motion detection is working fine

  11. Posted

    Hikvision camera uses 24 volts AC power supply at 24 watts max per manufacturer (not dc) or poe

    I have a 24 volts AC power supply with 60 watts (3 amps)

     

    Can I use the 60 watts power supply ?

    Hopefully the camera will draw only what it needs or will use the full 60 watts and burn up ?

  20. Posted

    Both are very impressive - Dahua and Geovision.

    I prefer without IR. Must be in a globe/dome - tinted if possible.

    Reason is that people close up will not notice the camera tracking them in the day.

    They can see the (840-850) IR light in the night unless I can get 940 nm

    I did some research which indicated that a Hikvision smart detection might be the answer but very expensive

  21. Posted

    I am looking for one of the best outdoor PTZ for daytime use at 500 feet.

    Prefer camera with a tinted globe so that no one can see the head moving (at close distance)

    Can I see the person face ?

    Can I read a license plate ?

    Can I get the best quality picture with 500 feet distance ?

     

    I was thinking about h265 network IP ptz for NVR operation and open to all suggestions.

  23. Posted

    I would like to waterproof existence cat5 connection (male-female).

    This is not a new connection but just want to cover the connection to make it waterproof for both the male and female.

     

    I don't know if a pass thru type will work because the cable is already connected but on open type should work.

     

    Any suggestions and pictures would be helpful

  24. Posted

    I have this high tech camera with NVS-DM36-HD (TI DaVinci chip) h264/h265

    I cannot get it to work with Dahua NVR4232 under onvif

    CMS software appears to be working fine but I want it to work with my NVR

    Just the PTZ functions works with the NVR. I want the NVR to configure it and use motion detect.

    I think that it needs a special protocol other than onvif ?

    Or do I need a different brand of NVR ?

  25. Posted

    Lots of good info. Will take some time to digest.

    My IP cameras can also map directly to a drive.

    Looks like 2 NVR may be the best option

    Don't have POE since PTZ uses 50 watts with IR and are 150 to 300 feet away with local power

×