narinesa
-
Content Count
83 -
Joined
-
Last visited
Posts posted by narinesa
-
-
Got the latest NVR firmware from Dahua a few days ago but no solution.
Dahua 4232 NVR and IP 2mp PTZ. Email works but no picture.
Have no problem with a analog DVR system.
-
I have a dahua NVR and a Dahua IP PTZ digital camera - 2mp
I have the email setup when a motion is detected.
NVR sends email but never any picture.
Yes, I have the attachment box checked.
I suspect that the problem may be either the picture size of approx. 1,800 kb as compared to an analog of approx 60kb or it is not storing the picture on the harddrive.
-
I have a Dahua NVR 4232 with 32 channels.
I need the new version of web service software to operate my auto tracking IVS feature.
-
I have a 32 channel NVR (without POE) Dahua NVR 4232.
Working fine except for one small problem:
Email notification and test are working BUT no picture.
I am configured for gMail and have the attachment box checked.
I am using a 2 MP PTZ camera Dahua SD65230-HNI
I do have a DVR working properly - is XTS 16 channel.
I did configured the router port forwarding with different ports for both.
DVR NVR
37778 37779 TCP
37777 37780 UDP
81 82 HTTP Port
? 443 HTTRS
554 554 RTSP
Any suggestions ?
I am also looking for auto tracking software for the camera IP PTZ Dome IVS setup
-
Yes, that is the PTZ in your link.
According to Dahua, rs485 are not unified with IP digital cameras - only with analog.
A PTZ controller cannot control a digital IP camera. Digital or network PTZ controller are very expensive and only a few are available.
The rs485 connection on the ip camera is for NVR and software control - also for digital network PTZ controller.
At the moment, I got it to work with NVR and software but not with any analog equipment.
-
UPDATE
Here is what I found out:
Analog cctv and digital cctv do not mix.
Digital PTZ controller cannot directly control any PTZ camera.
Analog PTZ controller can directly control an analog PTZ camera.
Digital PTZ are controlled via software or network digital PTZ controller.
-
I currently have a XTS 8100s DVR and a PTZ camera working with a US-K802 speed dome controller.
I just try to replace this camera with a Dahua SD-65230-HNI
I am getting picture but not rs485 function
I set the controller at Phelco-P, 9600, parity = none with id=001
Dahua PTZ shows id as 1-s
Don't know if this is the correct setting for Dahua or why the rs485 is not working. I did reverse the rs485 cable without any success.
Dahua NVR Web Service
in Digital Video Recorders
Posted
Need some help.
I cannot install web service on my computer.
It wants admin prevelege. I click ok but it is not installing
I am accessing same on the internet.
I am able to so with a DVR but not with the digital NVR.