Jump to content

Town

Members
  • Content Count

    3
  • Joined

  • Last visited

Everything posted by Town

  1. Town

    Mini nvr questions

    Here is log from boot: Linux version 3.0.8 (root@sqy-desktop) (gcc version 4.4.1 (Hisilicon_v100(gcc4.4-290+uclibc_0.9.32.1+eabi+linuxpthread)) ) #68 Tue Apr 22 21:53:49 CST 2014 CPU: ARMv7 Processor [414fc091] revision 1 (ARMv7), cr=10c53c7f CPU: VIPT nonaliasing data cache, VIPT aliasing instruction cache Machine: hi3520d Memory policy: ECC disabled, Data cache writeback On node 0 totalpages: 33792 free_area_init_node: node 0, pgdat c03c9410, node_mem_map c0416000 Normal zone: 264 pages used for memmap Normal zone: 0 pages reserved Normal zone: 33528 pages, LIFO batch:7 pcpu-alloc: s0 r0 d32768 u32768 alloc=1*32768 pcpu-alloc: [0] 0 Built 1 zonelists in Zone order, mobility grouping on. Total pages: 33528 Kernel command line: mem=132M console=ttyAMA0,115200 root=/dev/mtdblock2 rootfstype=squashfs mtdparts=hi_sfc:320K(uboot),1536K(kernel),4M(rfs),25792K(app),768K(config),256K(logo) PID hash table entries: 1024 (order: 0, 4096 bytes) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Memory: 132MB = 132MB total Memory: 129684k/129684k available, 5484k reserved, 0K highmem Virtual kernel memory layout: vector : 0xffff0000 - 0xffff1000 ( 4 kB) fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) DMA : 0xffc00000 - 0xffe00000 ( 2 MB) vmalloc : 0xc8800000 - 0xfe000000 ( 856 MB) lowmem : 0xc0000000 - 0xc8400000 ( 132 MB) modules : 0xbf000000 - 0xc0000000 ( 16 MB) .init : 0xc0008000 - 0xc0023000 ( 108 kB) .text : 0xc0023000 - 0xc03ae000 (3628 kB) .data : 0xc03ae000 - 0xc03c9aa0 ( 111 kB) .bss : 0xc03c9ac4 - 0xc0415fa0 ( 306 kB) SLUB: Genslabs=13, HWalign=32, Order=0-3, MinObjects=0, CPUs=1, Nodes=1 NR_IRQS:128 nr_irqs:128 128 sched_clock: 32 bits at 75MHz, resolution 13ns, wraps every 57266ms Console: colour dummy device 80x30 Calibrating delay loop... 1196.85 BogoMIPS (lpj=5984256) pid_max: default: 32768 minimum: 301 Mount-cache hash table entries: 512 CPU: Testing write buffer coherency: ok NET: Registered protocol family 16 Serial: AMBA PL011 UART driver uart:0: ttyAMA0 at MMIO 0x20080000 (irq = 40) is a PL011 rev2 console [ttyAMA0] enabled uart:1: ttyAMA1 at MMIO 0x20090000 (irq = 41) is a PL011 rev2 uart:2: ttyAMA2 at MMIO 0x200a0000 (irq = 42) is a PL011 rev2 bio: create slab at 0 SCSI subsystem initialized libata version 3.00 loaded. usbcore: registered new interface driver usbfs usbcore: registered new interface driver hub usbcore: registered new device driver usb cfg80211: Calling CRDA to update world regulatory domain Switching to clocksource timer1 NET: Registered protocol family 2 IP route cache hash table entries: 2048 (order: 1, 8192 bytes) TCP established hash table entries: 8192 (order: 4, 65536 bytes) TCP bind hash table entries: 8192 (order: 3, 32768 bytes) TCP: Hash tables configured (established 8192 bind 8192) TCP reno registered UDP hash table entries: 256 (order: 0, 4096 bytes) UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) NET: Registered protocol family 1 NetWinder Floating Point Emulator V0.97 (double precision) L2cache cache controller enabled VFS: Disk quotas dquot_6.5.2 Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) squashfs: version 4.0 (2009/01/31) Phillip Lougher JFFS2 version 2.2. (NAND) © 2001-2006 Red Hat, Inc. fuse init (API version 7.16) msgmni has been set to 253 no ack sha204_sn is 1 sha204_sn is 23 sha204_sn is 14 sha204_sn is 80 sha204_sn is a sha204_sn is 12 sha204_sn is b sha204_sn is 7a sha204_sn is ee no ack count is 255 no ack no ack count is 15 no ack no ack count is 255 no ack no ack no ack encryption ok Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) io scheduler noop registered io scheduler deadline registered (default) io scheduler cfq registered brd: module loaded loop: module loaded ahci: SSS flag set, parallel bus scan disabled ahci ahci.0: AHCI 0001.0200 32 slots 2 ports 3 Gbps 0x3 impl platform mode ahci ahci.0: flags: ncq sntf stag pm led clo only pmp pio slum part ccc sxs boh scsi0 : ahci_platform scsi1 : ahci_platform ata1: SATA max UDMA/133 mmio [mem 0x10080000-0x1008ffff] port 0x100 irq 52 ata2: SATA max UDMA/133 mmio [mem 0x10080000-0x1008ffff] port 0x180 irq 52 Spi id table Version 1.22 Hisilicon Spi Flash Controller V350 Device Driver, Version 1.10 Spi(cs1) ID: 0x01 0x02 0x19 0x4D 0x01 0x80 SPI FLASH start_up_mode is 3 Bytes Spi(cs1): Block:64KB Chip:32MB Name:"S25FL256S" spi size: 0x33554432 chip num: 1 6 cmdlinepart partitions found on MTD device hi_sfc Creating 6 MTD partitions on "hi_sfc": 0x000000000000-0x000000050000 : "uboot" 0x000000050000-0x0000001d0000 : "kernel" 0x0000001d0000-0x0000005d0000 : "rfs" 0x0000005d0000-0x000001f00000 : "app" 0x000001f00000-0x000001fc0000 : "config" 0x000001fc0000-0x000002000000 : "logo" Fixed MDIO Bus: probed ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300) ata1.00: ATA-7: SAMSUNG HD161GJ, 1AC01118, max UDMA7 ata1.00: 312581808 sectors, multi 0: LBA48 NCQ (depth 31/32) ata1.00: configured for UDMA/133 scsi 0:0:0:0: Direct-Access ATA SAMSUNG HD161GJ 1AC0 PQ: 0 ANSI: 5 scsi 0:0:0:0: Attached scsi generic sg0 type 0 himii: probed Invalid HW-MAC Address: 00:00:00:00:00:00 Set Random MAC address: 2E:43:12:80:8D:C0 ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver hiusb-ehci hiusb-ehci.0: HIUSB EHCI hiusb-ehci hiusb-ehci.0: new USB bus registered, assigned bus number 1 hiusb-ehci hiusb-ehci.0: irq 53, io mem 0x100b0000 hiusb-ehci hiusb-ehci.0: USB 0.0 started, EHCI 1.00 hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver hiusb-ohci hiusb-ohci.0: HIUSB OHCI hiusb-ohci hiusb-ohci.0: new USB bus registered, assigned bus number 2 hiusb-ohci hiusb-ohci.0: irq 54, io mem 0x100a0000 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected usbcore: registered new interface driver cdc_wdm Initializing USB Mass Storage driver... usbcore: registered new interface driver usb-storage USB Mass Storage support registered. ata2: SATA link down (SStatus 0 SControl 300) usbcore: registered new interface driver usbserial usbserial: USB Serial Driver core mousedev: PS/2 mouse device common for all mice usbcore: registered new interface driver usbhid usbhid: USB HID core driver TCP cubic registered NET: Registered protocol family 17 802.1Q VLAN Support v1.8 Registering the dns_resolver key type registered taskstats version 1 VFS: Mounted root (squashfs filesystem) readonly on device 31:2. Freeing init memory: 108K udevd (491): /proc/491/oom_adj is deprecated, please use /proc/491/oom_score_adj instead. usb 2-2: new low speed USB device number 2 using hiusb-ohci input: Logitech USB-PS/2 Optical Mouse as /devices/platform/hiusb-ohci.0/usb2/2-2/2-2:1.0/input/input0 generic-usb 0003:046D:C045.0001: input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-hiusb-ohci-2/input0 jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0137c2d0: 0x53a4 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0137c2d4: 0x10d2 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0137c2d8: 0x264c instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0137c2dc: 0xc96d instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0137c2e0: 0xb208 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0137c2e4: 0x9720 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0137c2e8: 0x0f90 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0137c2ec: 0xfb92 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0137c2f0: 0xb7e4 instead jffs2_scan_eraseblock(): Magic bitmask 0x1985 not found at 0x0137c2f4: 0x88c5 instead Further such events for this erase block will not be printed Hisilicon Media Memory Zone Manager hi3520D_base: module license 'Proprietary' taints kernel. Disabling lock debugging due to kernel taint Hisilicon UMAP device driver interface: v3.00 load sys.ko for Hi3520D...OK! Load tde.ko ...OK! load venc.ko for Hi3520D...OK! load group.ko for Hi3520D...OK! load chnl.ko for Hi3520D...OK! load h264e.ko for Hi3520D...OK! load rc.ko for Hi3520D...OK! load jpege.ko for Hi3520D...OK! load viu.ko for Hi3520D...OK! load vou.ko ....OK! load vpss.ko ....OK! load vda.ko ....OK! load region.ko ....OK! load vdec.ko ....OK load vhd firmware.ko OK load hdmi.ko ....OK! Load jpeg6b.ko success. (SDK_VERSION:[jpeg6bv1.0] Build Time:[Jul 30 2013, 17:13:35]) HISI_IRDA-MF @Hi3520Dv100R00 hiir: init ok. ver=Nov 26 2013, 15:14:13. sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB) sd 0:0:0:0: [sda] Write Protect is off sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA sda: sda1 sda2 < sda5 > sd 0:0:0:0: [sda] Attached SCSI disk USB Serial support registered for GSM modem (1-port) usbcore: registered new interface driver option option: v0.7.2:USB Driver for GSM modems rtusb init rt2870 ---> usbcore: registered new interface driver rt2870 PPP generic driver version 2.4.2 PHY: himii:03 - Link is Up - 100/Full EXT3-fs: barriers not enabled kjournald starting. Commit interval 5 seconds EXT3-fs (sda1): using internal journal EXT3-fs (sda1): mounted filesystem with ordered data mode [GPIO] GPIOGET_WATCHDOG Enable chardata = 1!!! ***link down status changed***. PHY: himii:03 - Link is Down PHY: himii:03 - Link is Up - 100/Full # Firmware is 07.2104 latest # fdisk -l Disk /dev/sda: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Device Boot Start End Blocks Id System /dev/sda1 1 1306 10490413+ 83 Linux /dev/sda2 1307 19457 145797907+ 5 Extended /dev/sda5 1308 19457 145789843+ b Win95 FAT32 # # mount rootfs on / type rootfs (rw) /dev/root on / type squashfs (ro,relatime) proc on /proc type proc (rw,relatime) sysfs on /sys type sysfs (rw,relatime) tmpfs on /dev type tmpfs (rw,relatime) tmpfs on /tmp type tmpfs (rw,relatime) devpts on /dev/pts type devpts (rw,relatime,mode=600,ptmxmode=000) /dev/mtdblock3 on /root type jffs2 (rw,relatime) /dev/mtdblock3 on /update type jffs2 (rw,relatime) /dev/mtdblock4 on /usr/etc type jffs2 (rw,relatime) usbfs on /proc/bus/usb type usbfs (rw,relatime) /dev/sda1 on /tmp/sata/sda0 type ext3 (rw,relatime,errors=continue,barrier=0,data=ordered) #
  2. Town

    Mini nvr questions

    Thanks, trying. Also, please need advice, none of my HDD connected via eSata Stalab external box not working. i seen HDD inside fimeware GUI as normal and conencted. But when i trying to make capture screen or hit red record button nothing happens. Also i tried t format hdd from firmware Format button but same things. Any solution?
  3. Town

    Mini nvr questions

    hi! got 2 NVRs MINI, tryint to connect different cameras. My cameras are: Hikvision ds 2232 - rtsp cp-450-1.3 - ONVIF Other 2 cameras translating streams via MJPEG. Had anyone success to connect mjpeg stream to NVR mini? thanks!
×