Lbarreiro

Not a problem. Same to you. One thing to note. I believe this camera is sold under several different brand names such as Sricam, Wanscam, etc... I would suggest not dealing with Sricam as I have found their customer service to be abysmal. Also, make sure to select the 720p version to ensure it is onvif compliant. Some similar models are only 300k or .3mp and I am unaware if these conform to onvif. This is the lowest price I have seen on the specific model though. If you were to purchase one by another brand name I would recommend Wanscam. I have exchanged some emails with them and they seem to be very happy to assist customers and have had very fast response times. Hi, Thanks for all the help Now that the Cam is working and i understand the onvif I have another problem... I have tried to connect to the usb port one portable hard drive of 250Gb, restart the NVR and it wont pass the start screen. Try with another hard drive and the same result. Made another try now with a separated power to the hard drive... same result. A strange thing is that i use a USB pen of 4Gb and the NVR start normally but it don´t show in storage management any disk. I have the v4.0 (20141030) Thanks

Thank you for the help and light on that matter. Happy Christmas!

Thank you. Any suggestion on that?

Thanks for the reply. Is there any way I can upgrade the firmware of the camera to be comply with protocol?

Hi, I just received a new Mini NVR 8chn ESCAM. I have 2 Foscam working, one is FI8918W the other is FI8909W. I plugged the NVR to the network (the PING for the IP is OK) and when i do the search it can´t find any cameras. So manually i put the IP´s and the correct COM ports, and still no image. When i use the same IP and COM in IE i can see the image so it´s not a problem of communication. After reading this tread i know now that there are Protocols Can someone tell me if it´s possible to connect to both of cameras? and how? Thanks