phillipscctv
-
Content Count
52 -
Joined
-
Last visited
Posts posted by phillipscctv
-
-
Connect the RX+ and RX- of the BB53HD to your DVR RS485 (Pay attention to the polarity) RX+ go to RS485+, RX- go to RS485-.
Now you need to configure your PTZ and DVR protocols. (disregard all the alarm inputs connections from BB53HD back box)
Help wiring pelco spectra BB53HD-PG-E
in Installation Help and Accessories
Posted
The current setting of your Pelco Spectra III dip switches are Pelco P, 9600 baud rate, PTZ address is #1. In order for you to control the PTZ via the DVR on screen display or client software you must match the above settings to your DVR.
Example:
DVR: Camera Address #1
Protocol Pelco P
Baud Rate 9600
PTZ: Camera Address #1
Protocol Pelco P
Baud Rate 9600
Please refer to sticker/label settings Switch #1 and #3. Switch #1 are for addressing, switch #3 are for protocols.
if your DVR cannot support multiple protocols please post your question here again.
Goodluck!
Phil