jc_james03
-
Content Count
12 -
Joined
-
Last visited
Posts posted by jc_james03
-
-
yes but the cameras seems to be broken. WHen it hits bright light it will turn to green
-
-
Can anyone help me get a manual for cp-uap-sc23cl6 or send me a link of it
I have trouble Configuring it.
Thanks a lot
-
I think it has a wrong firmware. You need to flash the correct firmware
-
CAn anyone give me a link or a manual to CP plus CP-UAP-SC23CL6 analog ptz camera.
-
hi,i have the same problem. After upgrade the DVR will not load, just freeze on logo-screen.
the DVR is chineese unknown, on sticker write "Model: AHD-6008NH-V2", on motherboard write "08NH".
i found this firmware for "08NH" http://www.flktech.net/en/download.asp?tid=3 but i can't reflash the DVR.
DVR freeze on logo-screen, but have ping-response, and have only 2 ports open: 9527 and 9530, but i can't connect via telnet....
Can someone help me? How I can reflash the DVR?
You can download a TFTP tool to flash the right firmware.
-
Can anyone help me. I recorder a camera with a microphone and when I started a playback their is no audio output in DVR.
Thanks for your time
-
Can anyone help me how to hard reset Hikvision dvr to factory reset?
MODEL: DS-7208HWI-E2
-
@ben10
my dvr has a rs232
-
If you messed up with the firmware and installed a wrong one, you can restore the correct one using TFTP.Could you teach me how to correct it?
-
Can anyone help me in my DVR after an upgrade it will not load to its GUI and it start to beep too long and will not stop.
DVR HIKVISION
Model DS-7208HWI-E2
Litebeam m5 vs Powerbeam m5 vs Nanostation m5
in System Design
Posted
I am planning to build and design PTZ and IP cameras across our town. Which should I use as an transmitter?Litebeam m5, Powerbeam m5 or Nanostation m5. Which is better for gain connectivity? It is an urban area with high noise. I am planning to use and rocket Sector antenna.
TIA