-
Content Count
380 -
Joined
-
Last visited
Posts posted by coolie11
-
-
thinks coolie11it does not work you can calculate a code for this date?
the dvr block in 30s from 2001/01/01 00h00m00s to 2001/01/01 00h00m29s time. and displays the time2000/12/31 23:59:59 for one seconde
look the picture
Whats the current date and time/
-
You would have to upgrade the DVR also.
-
You are right.
There is no point upgrading your cameras if your DVR only records at CIF.
-
"need code mster of dvr td2316ss-c"
"all code of dvr"
What do you mean?
-
-
-
yes.
The Wireless Bulb CCTV Security DVR Camera set with AV-OUT is not a DVR.
It allows the transmission of Audio/Video over a wireless signal to Viewing/Recording device.
-
If you are satisfied with the daytime picture, installing floodlights (NO IR) would solve your issue, other wise don't waste time and money on another analog camera.
If you can fit the bill look into upgrading to megapixel cameras, you wont be disappointed.
-
Most Capture cards are not natively supported by windows.
Did you install the Eyemax software?
-
Im Installing a 16ch cctv system in 2 homes across the road from each other the owner that owns both homes would like to link the 2 system together so he can view both systems on one screen on his laptop via wifi and there is currently a wireless bridge between the homeswhat would be the easiest option with a tight budget in mind
2 x 16ch standalone dvrs on a network
have all ip cameras and have a nvr ( but the customer would like to stay cheap)
have a 32 ch dvr and somehow wirelessly stream one set of the 16 cameras across
have 2 16 ch standalone dvrs and have 2 16ch network video server
thanks
1. You can use 2 Standalone Dahua DVR's recording independently with SmartPSS for local monitoring of both systems (PC REQUIRED) (Cheapest Option)
2. You can use 2 Standalone Dahua DVR's recording independently with 1 NVR (NO RECORDING) for local monitoring on TV (NO PC REQUIRED)
3. You can use 2 Standalone Dahua DVR's NO RECORDING with 1 NVR for RECORDING and local monitoring on TV (NO PC REQUIRED)
4. You can use IP Cameras at both locations with 1 NVR for RECORDING and local monitoring on TV (NO PC REQUIRED) (BEST QUALITY OPTION)
5. You can always mix-n-match devices to accomplish your ideal install to satisfy quality and budgetary requirements.
6. Any manufacture DVR's/NVR's with CMS Program to view all cameras at once or IE for one system at a time on Laptop.
-
I was referring to the NVR Firmware.
Thanks.
-
dahua 3216 nvr new version updated...Do you have the NTSC Version of this Firmware?
-
Your configuration looks correct.
Try reducing the Extra Stream, smoetimes the mobile phone bandwith can't negotiate the traffic properly.
I have a couple of htese setup the same way with no issues
-
Post a screenshot of the network setting page and your router port forwarding.
Does the user account you are using have monitoring rights?
-
Did you set the Camera ID's?
-
Are you using the onboard VGA?
NV6480EXP System Requirements
CPU: Pentium® 4 3.0 GHz or higher
Motherboard with Intel 915, 945, 955, 965 Chipset (VIA/SiS/Ali Chipset motherboards not supported) (Recommended Intel, ASUS, Gigabyte motherboards)
OS: XP Professional (For HT)
RAM: 512MB minimum
PCI-Express x 1 Compliant
HDD: 120GB or higher
CD-ROM/DVD-ROM
32-bit high color SVGA graphics card with at least 128MB video memory and DirectDraw® / YUV Rendering Capability (AGP Recommended)
10/100 Base-T Ethernet card
Sound card and speakers
-
Password for 04/16/2013 = 394816
Password for 04/17/2013 = 856992
-
Did you use the TCP Port for the Mobile Phones?
-
The Prolink H5201 is a DSL ROUTER
You need to put the Prolink in Bridge mode or configure the Linksys to act as a switch.
-
what is the guiPost a picture of the login or info screen.
-
-
Just buy L access point that agrees with your wallet....."L" ?
Any
-
Use Preset 95.
-
Just buy L access point that agrees with your wallet.
Unbricking your Dahua IP camera (Tips, Tricks & Firmware)
in IP/Megapixel Cameras and Software Solutions
Posted
Hi All,
I'm attempting to unbrick my camera IPC-HDW2100 via TFTP method after an unsuccessful firmware upgrade.
I have 9 of these and all the others upgraded fine using DH_IPC-HX3(2)XXX_Eng_N_V2.420.0000.0.R.20140414 except for 1.
The following is what shows up when connected via serial:
Puttty:-
Õëy½Þ¯UÛ
¿£75A-#3!A7;==£±£åëg!=7¿=77¿åëg!=7-#1¿«ïy½«ÓÑÔ¿9!#¿5955757£åë®j:ªºú»!¿15¿-#3!£åë¿åëY=¿Y_m¿e5%!
¿-79!75¿'åëa¿¿¿5'åëu¿¿¿5'åë]Ñ©Ú#5¿_oM¿qucu[my¿§-7åëQº=£1/¿1=5=-!I
5¿753='¿-%=15åënnÛ ££¿!m_¿=77¿-¿
5¿¿¿}[e¿g-#¿i5'¿m%=15¿¯#9!%57åë¿¿¿w==¿Y-#9-A5¿{åë¿¿¿m%=15¿W
-#1¿y/59)%¿£££¿¯ºú»õ=¿y[yåëu[[a[¿9=#±¿15¿)5'¿-%=15½åëwo{aaW¹¿
Any idea what mite be going on here?
Any assistance will be greatly appreciated.
Thanks